ENGLISH
LCD (LCD SETTING) |
|
| 3. The message “COMPLETED” is displayed | |||
|
| |||||
Press the button next to the “LCD” indicator in the | on the LCD to indicate that the display time | |||||
SYS.SETUP menu screen in the LCD. | setting is completed. | |||||
The LCD setting menu is displayed. |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LCD TIMER (LCD timer setting)
This sets the time that the LCD remains on, after a button is pressed on the RC3001.
When there are no operations and the LCD is turned off, this setting enables power consumption to be reduced and the life of the battery pack to be extended.
The default setting is 10 seconds.
1. The LCD setting menu is displayed, and so press the button next to “LCD TIMER” in the LCD display.
2. Press the buttons (right: +, left:
To leave the LCD always on, press the button next to the “ALWAYS ON’ indicator. However, please note that this setting will shorten the life of the battery pack.
After deciding the settings, press the ENTER button.
•Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu.
•Pressing the Home button returns the LCD to the MAIN MENU.
Note:
If the LCD is turned off by the LCD timer, pressing any of the buttons on the remote controller will turn it on again. When the LCD is turned on, the pressed command is not activated.
To execute a command operation, press the button while the LCD is on.
22