2
ENGLISH
BEFORE USE

LOAD THE RECHARGEABLE BATTERY

PACK INTO THE REMOTE CONTROLLER

1. Remove the battery case cover.
Battery case cover
2. Insert the rechargeable battery cable
connector into the socket of the remote
controller.
Rechargeable battery
pack
3. Pull the cable of the rechargeable battery
pack around so that it does not get caught
in the case as shown in the fi gure below,
then load the rechargeable battery pack
into the battery case.
Cable
4. Attach the battery case cover.
Battery case cover
• When removing the battery pack, take off the
battery case cover, then pull up the ribbon
stretched at the bottom of the battery case to
take out the rechargeable battery pack from
the battery case.
CAUTION ON BATTERY
• Be sure to use only the rechargeable nickel
metal-hydride (Ni-MH) battery pack that is
supplied with the remote controller.
• When loading, be sure to properly attach the
rechargeable battery cable connector to the
remote controller socket.
• Be sure to properly dispose of the rechargeable
battery pack in accordance with the guidelines
(regulations) for your local area.
REPLACING THE BATTERIES
The batteries in the Remote controller are Nickel
Metal Hydride (Ni-MH) batteries. It is advised to
change the batteries when the operation of the
Remote controller becomes unreliable.
If you want to order new batteries, please contact
your Marantz authorized dealer or Marantz
customer service.
Warning:
Replace the batteries only with original Marantz
RC3001 batteries; otherwise the guarantee is
no longer valid and hazardous situations could
occur.