EX/ES
This mode provides 6.1 channel surround for DOLBY DIGITAL EX, DTS-ES encoded source material such as DVD.
This mode cannot be used when an analog input has been selected.
Dolby Digital EX
In a movie theater, film soundtracks that have been encoded with Dolby Digital surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program.
This channel, called Surround Back, places sounds behind the listener in addition to the currently available front left, front center, front right, surround right, surround left and subwoofer channels.
This additional channel provides the opportunity for more detailed imaging behind the listener and brings more depth, spacious ambience and sound localization than ever before.
Dolby Digital EX is not available in the system without surround back speaker(s).
DTS-ES (Discrete 6.1, Matrix 6.1)
DTS-ES adds the surround center channel audio to the DTS 5.1-channel format to improve the acoustic positioning and makes acoustic image movement more natural with the 6.1-channel reproduction.
This receiver incorporates a DTS-ES decoder, which can handle DTS-ES Discrete-encoded and DTS-ES Matrix-encoded program sources from DVD, etc..
DTS-ES Discrete 6.1 features digital discrete recording of all channels including the surround back channel(s) and higher quality of audio reproduction.
DTS-ES is not available in the system without a surround back speaker.
dts MODE
(dts, Neo:6 Cinema, Neo:6 Music)
This mode is for DTS encoded source materials such as LASER DISC, CD, and DVD. Neo:6 is for some 2 channel sources.
dts : This mode is enabled when playing source materials encoded in dts multichannel.
Playing multichannel encoded 5.1-channel dts sources provides five main audio channels (left, center, right, surround left and surround right) and Low Frequency Effect channel.
dts-ES decoding is not available in this mode. The DTS mode cannot be used when an analog input has been selected.
Neo:6 Cinema, Neo:6 Music
This mode decodes 2-channel signals into 6- channel signals using high-accuracy digital matrix technology.
The DTS NEO:6 decoder has near-discrete properties in the frequency characteristics of the channels as well as in channel separation.
According to the signals to be played back, DTS NEO:6 uses either the NEO:6 CINEMA mode optimized for movie playback or the NEO:6 MUSIC mode optimized for music playback.
Notes:
•Neo:6 mode is available to 2ch input signals which are encoded in Dolby Digital or PCM format.
•PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz.
MULTI CH. ST
This mode is used to create a wider, deeper and more natural soundstage from two channel source material. This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel.
CIRCLE SURROUND II
(CSII-CINEMA, CSII-MUSIC, CSII-MONO)
Circle Surround is designed to enable multichannel surround sound playback of non-encoded and multichannel encoded material.
Backward compatibility provides listeners with up to 6.1 channels of surround performance from entire collection of music and film, including broadcast, videotape and stereo recorded music.
Depending on source material, you can select CSII-Cinemamode, CSII-Musicmode or CSII- Mono mode.
CSII Cinema mode
This mode is suited for playing back Circle Surround-encoded and non-encoded film and television soundtracks. Cinema Mode enables 6.1- channel surround playback of 2-channel sources such as Video Cassettes, TV broadcasts, streaming media and DVDs.
CSII Music mode
This mode is suited for playing back Circle Surround-encoded and non-encoded music. Music Mode decodes, music DVDs, radio and TV music broadcasts and CDs into enveloping 6.1- channel surround.
CSII-Mono mode
This mode plays back monaural recordings from any source, including CDs, DVDs and TV and radio broadcasts in compelling 6.1-channel surround.
Notes:
•CS II mode is available for 2ch input signals which are encoded in Dolby Digital or PCM format.
•PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz.
VIRTUAL
This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS.
STEREO
This mode bypasses all surround processing.
In stereo program sources, the left and right channels play normally when PCM-audio or analog stereo is input.
With Dolby Digital and DTS sources, the 5.1 multichannels are converted to two channel stereo. 96 kHz PCM source material can be played back in stereo mode.
PURE-DIRECT
In the Pure Direct mode, the tone control circuit and bass management configuration are bypassed for full range frequency response and the purist audio reproduction.
96 kHz PCM source material can be played back in this mode.
Notes:
•Internal speaker size is setup to front L/R = LARGE, Center = LARGE, Surround L/R = LARGE and Subwoofer = YES automatically. Tone controls and additional processing are also defeated.
•When you use this mode with certain DVD and CD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output.
CAUTION
NOTE for DTS signal
*Connected DVD-player, laser-disc player or CD- player needs to support DTS-digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the SR5600 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the SR5600 cannot recognize the signal as DTS data.
| * Depending on the player used, DTS play may | ENGLISH |
| produce a short noise. This is not a malfunction. |
| |
| * While signals from DTS-laser disc or CD are | |
| playing in another Surround mode, you cannot | |
| switch to digital input or from digital input to | |
| analog input by INPUT SETUP in SETUP MAIN | |
| MENU or the A/D button. | |
| * The outputs for the VCR 1 OUT, DSS/VCR 2 | |
| OUT, TAPE OUT, and CD-R OUT output analog | |
| audio signals. Do not record from CDs or LDs | |
| that support DTS using these outputs. If you do, | |
| the DTS-encoded signal will be recorded as | |
| noise. | |
NOTE for Dolby Digital Surround EX signal
*When playing Dolby Digital Surround EX- encoded software in 6.1 channels, it is required to set the EX/ES mode.
*Note that some of Dolby Digital Surround EX- encoded software does not contain the identification signal. In this case, set the EX/ES mode manually.
NOTE for 96kHz PCM audio
*AUTO, PURE-DIRECT, and STEREO modes can be used when playing PCM signals with a sampling frequency of 96 kHz (such as from DVD-Video discs that contain 24 bit, 96 kHz audio). If such signals are input during playback in one of the other surround modes, output from SR5600 will be muted.
*Certain DVD player models inhibit digital output. For details, refer to the player’s operation manual.
*Some DVD formatted discs feature copy protection. When using such disc, 96 kHz PCM signal is not output from the DVD player. For details, refer to the player’s operation manual.
NOTE for HDCD signal
*HDCD is effective only at the time of digital input.
*AUTO, PURE DIRECT, and STEREO modes can be used when playing HDCD signals (such as from CD discs that contain HDCD).
*You may not be able to play some HDCD source signals from certain CD players if you connect the player to the SR5600 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the SR5600 cannot recognize the signal as HDCD data.
25
