CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.

Read Instructions – All the safety and

 

operating instructions should be read before

 

the product is operated.

2.

Retain Instructions – The safety and operating

 

instructions should be retained for future

 

reference.

3.

Heed Warnings – All warnings on the product

 

and in the operating instructions should be

 

adhered to.

4.

Follow Instructions – All operating and use

 

instructions should be followed.

5.

Cleaning – Unplug this product from the wall

 

outlet before cleaning. Do not use liquid

 

cleaners or aerosol cleaners. Use a damp

 

cloth for cleaning.

6.

Attachments – Do not use attachments not

 

recommended by the product manufacturer

 

as they may cause hazards.

7.

Water and Moisture – Do not use this product

 

near water-for example, near a bath tub, wash

 

bowl, kitchen sink, or laundry tub, in a wet

 

basement, or near a swimming pool, and the

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

like.

8. Accessories – Do not place this product on an

unstable cart, stand, tripod, bracket, or table.

The product may fall, causing serious injury to

a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod,

bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions, and should use a

mounting accessory recommended by the

manufacturer.

Page 2
Image 2
Marantz SR5600 manual Read Before Operating Equipment

SR5600 specifications

The Marantz SR5600 is a powerful and versatile AV receiver that delivers an exceptional home theater experience for audio and video enthusiasts alike. Known for its high fidelity audio performance and robust feature set, the SR5600 is designed to enhance your entertainment space, making it an excellent choice for both casual viewers and dedicated audiophiles.

One of the standout features of the Marantz SR5600 is its 7.1-channel sound capability. With a total power output of 110 watts per channel, it provides enough oomph to fill larger rooms with dynamic sound. The receiver supports multiple audio formats, including Dolby Digital, Dolby Pro Logic II, and DTS, ensuring that you experience movies, music, and games in their full sonic glory. The onboard DSP (Digital Signal Processing) features various sound modes, allowing listeners to customize their audio experience according to their preferences and the nature of the content being played.

In terms of connectivity, the SR5600 includes an impressive array of inputs and outputs. It features multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, game consoles, and streaming devices with ease. Additionally, the receiver is equipped with component and composite video inputs, along with digital optical and coaxial connections, providing flexibility for integrating legacy devices.

The Marantz SR5600 also incorporates advanced video upscaling technology, ensuring that standard-definition video can be enhanced to near-HD quality. This feature is particularly beneficial for those who enjoy watching older movies or TV shows, as it helps improve picture clarity and detail when viewed on modern displays.

Moreover, the SR5600 features the renowned Marantz audio philosophy, emphasizing high-quality components and exceptional build quality. This attention to detail extends to the receiver's aesthetics, showcasing a sleek design that complements any home entertainment setup.

One of the highlights of the Marantz SR5600 is the user-friendly interface and remote control, making it straightforward to navigate settings and preferences. Additionally, the receiver supports various room correction technologies, which help to optimize audio output based on the room's acoustics, ensuring that you get the best possible sound in your specific environment.

In summary, the Marantz SR5600 is a well-rounded AV receiver that combines advanced technology with high-quality audio performance. Its extensive connectivity options, powerful sound capabilities, and user-friendly design make it an excellent choice for anyone looking to elevate their home entertainment system. Whether you're hosting movie nights or enjoying your favorite music, the SR5600 promises an immersive and engaging experience.