Marantz SR5600 Multi Room System, 1 2 3, Multi Room Playback Using, The Multi Room Out Terminals

ENGLISH

MULTI ROOM

SYSTEM

The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5600 is located.

To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary.

The operations possible with the multi room function are explained briefly below.

For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.

When the outputs of the MULTI OUT terminals are wired and connected to amplifiers installed in other rooms or M (MULTI) SPEAKER B terminals

MULTI ROOM PLAYBACK USING			MULTI ROOM PLAYBACK USING
THE MULTI ROOM OUT TERMINALS			THE MULTI SPEAKER TERMINALS
The SR5600 is equipped with audio pre-out			The SR5600 allows you to connect another set of
terminals for which the volume is adjustable as the			speakers and place them in a different room or
MULTI output terminals.			separated area for listening to music.
A separately sold stereo power amplifier can be			The MULTI ROOM SPEAKER system can not be
connected to enjoy multi room playback.			operated with the supplied remote controller.
The MULTI OUT system can not be operated with			2. 1.	2.
the supplied remote controller.		2.
1.	2.		AV SURROUND RECEIVER SR5600
			SURROUND
			DIGITAL
	AV SURROUND RECEIVER SR5600		AAC
	SURROUND
	DIGITAL
	AAC
			1. Press the M. SPEAKER B button. The unit

are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.

SR5600 has some feature to MULTI ROOM SYSTEM as source selector, sleep timer, Multi Room Speaker output and remote control.

1.

2.

3.

Press the MULTI button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator

for approx. 10 seconds.

In this time, you can select the input source by turning the input selector knob.

Then, the display indicates “MULTI VOLUME” “MULTI VOL. xx” for approx. 5 seconds.

During this time, you can set the volume level

in the multi room as desired.

This will only set the volume in the second

room.

enters multi room speaker mode and the display indicates “SELCT SOURCE” and

flashes the “MULTI” indicators for approx. 10

seconds.

2. In this time, you can select the input source by turning the input selector knob.

3. Then, the display indicates “MSPKR VOLUME” “MSPKR VOL.–18” for approx. 5 seconds.

During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the multi room.

Notes for MULTI ROOM SPEAKER

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•MULTI ROOM SPEAKER output terminals can b e u s e d w h e n t h e S U R R O U N D B A C K SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 18)

•“The Surr. Back Speakers are in use” is displayed by pressing the MULTI SPEAKER button when the SURROUND BACK SPEAKER is set except NONE in SPEAKER SETUP menu . (See SPEAKER SETUP, page 18)

•Multi room operations cannot be performed from the remote controller.

32