Marantz SR6300 manual Speaker Setup, Speaker Size

ENGLISH	INPUT SETUP (ASSIGNABLE DIGITAL INPUT)
	Five digital inputs can be assigned as the desired source.
	Use this menu to select the digital input jack to be assigned to the
	input source.
	1.	Select “INPUT SETUP” in SETUP MAIN MENU with or cursor
		button, and press the OK button.
			1 I N P U T S E T U P
			CD	: D I G 3	T V	: ANA
			T A P E : ANA		D V D	: D I G 4
			CD - R : D I G 1 V C R 1 : ANA
					D S S	: D I G 2
			MA I N			E X I T
	2.
		To select the input source, press or				cursor button.
	3.	To select the digital input jack , press				or cursor buttons.

Select “Dig x” for input sources, for fixed the digital input jack.

Select “ANA” for input sources for which no digital input jacks are used.

4. If you finish the setup in this sub-menu, move cursor to MAIN with or cursor buttons and press OK button.

Notes:

•The TUNER and AUX are fixed to the analog input, and cannot be selected for any digital input.

•When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.

SPEAKER SETUP

After you have installed the SR6300, connected all the components, and determined the speaker layout, it is now time to

perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you first determine the following characteristics:

SPEAKER SIZE

When setting the speaker size in the SPEAKER SIZE sub-menu, use the guidelines given below.

LARGE: The complete frequency range for the channel you are setting will be output from the speaker.

SMALL: Frequencies of the channel you are setting lower than 100 Hz will be output from the subwoofer.

If the Subwoofer is set to “NONE” and the front speakers are set to “LARGE,” then the sound may be output from both the left and right speakers.

2 - 1 S P E A K E R S S I Z E

S UBWOOF E R	:	Y E S
F RON T L / R	:	L ARGE
C E N T E R	:	SMA L L
S UR ROUND L / R	:	SMA L L
S UR R . C E N T E R	: Y E S
MA I N	N E X T E X I T

1. Select “SPEAKER SETUP” in MAIN SETUP MENU withor cursor button, and press the OK button.

2. To select the each speaker , press or cursor button.

3. To select the setting of size to each speaker, press or cursor buttons.

4. If you finish these setup, move cursor to “NEXT” with or cursor button and then press OK button to go to next page.

SUBWOOFER:

YES: Select when a subwoofer is connected.

NONE: Select when a subwoofer is not connected.

FRONT L/R

LARGE: Select if the front speakers are large sized.

SMALL: Select if the front speakers are small sized.

•If “NONE” is selected for the Subwoofer setting, then this setting is fixed to “LARGE.”

•If “SMALL” is selected for the FORNT L/R, then the center and surround L/R can not select “LARGE.”

CENTER

NONE: Select if no center speaker is connected.

LARGE: Select if the center speaker is large sized.

SMALL: Select if the center speaker is small sized.

SURROUND L/R

NONE: Select if no surround left and right speakers are connected. LARGE: Select if the surround left and right speakers are large sized. SMALL: Select if the surround left and right speakers are small sized.

SURR. CENTER

YES: Select when a surround center is connected. NONE: Select when a surround center is not connected.

•If “NONE” is selected for the Surround L/R setting, then this setting is not available.

16