EXAMPLES OF MACRO PROGRAMS
Example 1
Change the input source for the amplifier to CD and play the 3rd track on a CD in the CD player.
1. Press and hold the T.MODE ⁄1and MENU button ¤2until the MACRO is displayed on the LCD.
•LEARN and MACRO is displayed blinking.
2. Press the CD Function button ⁄9.
3. Press CD ⁄9, 3 ,, and 3 ⁄8buttons.
(2)
(3)
(1)
4. When you are finished programming the macro, press the OK button ⁄5until the display returns to USE mode.
Now, execute the macro you just programmed.
1. Press the CD Function button ⁄9for 3 seconds.
•The macro commands are transmitted to the components in order, and the steps of the operations are displayed on the LCD in order.
Example 2
Turn the main amplifier ON → Change the amplifier’s input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to
PLAY
1. Press and hold the T.MODE ⁄1and MENU button ¤2until the MACRO is displayed on the LCD.
•LEARN and MACRO is displayed blinking.
2. Press the DVD Function button ⁄9.
•Here the DVD Function button ⁄9is used as the macro button, but any function button can in fact be used.
3.To set the various steps of the macro, press the following buttons in order:
(1)AMP*⁄9→ (2) POWER ON ‹9→ (3) DVD ⁄9→ (4) AMP*⁄9→
(5)8 (VIRTUAL) , → (6) DVD* ⁄9→ (7) 3 ⁄8.
(2)
(5)
(7)
(3) (6)
(1) (4)
4. When you are finished programming the macro, press the OK button ⁄5until the display returns to USE mode.
Now, execute the macro you just programmed.
1.Press the DVD Function button , for 3 seconds.
The macro commands are transmitted in order, and the steps of the operations are displayed on LCD in order.
•When executing this macro, function operations AMP* and DVD* only switch the command set of the remote controller and no signal is transmitted to the component.
ENGLISH
29
