Marantz SR6300 manual English, button, and press the OK button, To Select desired channel , press

CS2 (CIRCLE SURROUND II) PARAMETER

6 C S 2 P A RAME T E R

T RUBA S S	:	0
S R S D I A L OG	:	0

		MA I N	E X I T
1.
	Select “CS2” in SETUP MAIN MENU with			or	cursor button,
2.	and press the OK button.
	To Select desired contents as below, press			or	cursor button

TRUBASS: Set the TRUBASS level between 0 and 6 level in 1

level interval with or cursor button.

TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers

adding exciting, deeper bass effects.

SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1 level interval with or cursor button.

This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say.

If “NONE” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with or cursor buttons and press OK button.

6.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for 6.1-channel input sources.

Here you will adjust the volume for each channel so that they are all heard by the listener at the same level.

		7 6 . 1 CH I N P U T L E V E L
		F RON T		L	:	0	d B
		C E N T E R			:	0	d B
		F RON T		R	:	0	d B
		S URR . R			:	0	d B
		S URR . C			:	0	d B
		S URR . L			:	0	d B
		S UB	W		:	0	d B
		MA I N					E X I T
1.
	Select “6.1CH IN” in SETUP MAIN MENU with or cursor
2.	button, and press the OK button.
	To Select desired channel , press					or	cursor button.
3.	Using the or		cursor buttons, adjust the volume level of each
4.	channel.
	If you finish the setup in this menu, move cursor to “MAIN” with
	or cursor buttons and press OK button.

Note:

•The condition of these setup will be memorized to 6.1CH INPUT source.

ENGLISH

19