Marantz SR6300 manual English, General Malfunction, How To Reset The Unit, Memory backup

ENGLISH

GENERAL MALFUNCTION

If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:

-disconnect the plug from the AC line supply

-after waiting at least three minutes, reconnect the plug to the AC line supply

-re-attempt to operate the equipment

Memory backup

•In case a power outage occurs or the power cord is accidentally unplugged, the SR6300 is equipped with a backup function to prevent memory data such as the preset memory from being erased.

The memory functions are backed up for up to about one week.

Note:

•First of all keep SR6300 Standby or Powered-on more than 6 hours, to sufficient time for memory back up.

HOW TO RESET THE UNIT

Should the operation or display seem to be abnormal, reset the unit with the following procedure.

1. The SR6300 is turned on, press and hold the A/D u and DIMMER !0buttons simultaneously for 3 seconds or more.

Note:

•Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings.

36