Adjusting the Image Position
You can adjust the image position with the Lens Shift knob.
❖Turn the Lens Shift knob to clockwise : The image goes up.
Counterclockwise
Up
❖Turn the Lens Shift knob to counterclockwise : The image goes down.
Clockwise
Down
Adjusting the Height
You can position the projected image by changing the height of the projector’s adjusters.
1. Move the adjuster lever to the left or right to enable adjuster changing. Carefully lift the projector.
2.Once having positioned the projector, return the adjuster lever as before to lock in place. Check
the adjusters are securely locked before releasing your hands from the projector.
3. Turn the adjuster to
❖Returning the Projector to its Initial Position
Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down.
Keystone Correction
When the projecting image is a trapezoid, correct it in Keystone and in the Display Menu. See “Display”. (☞ P.22)
❖Keystone
(Electronic keystone correction)
ENGLISH
11
