Fine Menu 1
Fine Menu 2
ENGLISH | By adjusting this Fine Menu, you can make fine picture adjustment. | |||||
| ||||||
|
| Standard 1 |
|
|
| |
|
|
|
|
|
|
|
|
| Picture Adjust |
| Sharpness | 0 |
|
|
| Fine Menu 1 |
| Noise Reduction | 0 |
|
|
|
|
| |||
|
| Fine Menu 2 |
| R Gain | 0 |
|
Input Signal | G Gain | 0 |
RGB/HD Adjust | B Gain | 0 |
Display | R Bias | 0 |
OSD/Blanking | G Bias | 0 |
Config. | B Bias | 0 |
Standard 1
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display |
OSD/Blanking |
Config. |
| Cinema | Auto | |
| VCR Mode | On | |
| Black Level | 0 IRE | |
| FRC | Auto | |
| Picture Shift V | 0 |
|
|
| ||
| Luminance Gain | 0 |
|
| Chroma Delay | 0 |
|
|
| ||
|
|
|
|
Item | Adjustments | |
Sharpness |
| |
Noise Reduction | 0 | 50 |
R Gain |
| |
G Gain | ||
B Gain | ||
R Bias | Ô50 | |
G Bias | Ô50 | |
B Bias | Ô50 | |
–Sharpness
Adjust the sharpness.
–Noise Reduction
Adjust the noise reduction.
–R Gain
This menu allows the users to set the gain for red.
–G Gain
This menu allows the users to set the gain for green.
–B Gain
This menu allows the users to set the gain for blue.
–R Bias
This menu allows the users to set the bias for red.
–G Bias
This menu allows the users to set the bias for green.
–B Bias
This menu allows the users to set the bias for blue.
Note :
•The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default excluded).
20
Item |
| Adjustments | |
Cinema | Auto, Off |
|
|
VCR Mode | On, Off |
|
|
Black level | 0 IRE, 7.5 IRE /Normal, Expand (For HDMI input) | ||
FRC | Auto, On |
|
|
Picture Shift V | Ô 0 | Ô 50 | |
Luminance Gain | Ô 0 | Ô 50 | |
Chroma Delay | Ô 0 | Ô 5 | |
–Cinema
Auto : Automatically selects the cinema mode when a video signal is input. NTSC:
Off :
–VCR Mode
On : A projector is forced into the
Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).
–Black level
Select the black level by a video source.
–FRC (Frame Rate Conversion)
Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical frequency of input signal.
On : Frame Rate Conversion function is “On”. (60Hz fixed)
–Picture Shift V
When Aspect on the Picture Adjust menu is set to “Zoom”, this setting allows the user to move the projected image vertically in order to see parts on the image not appearing on the screen.
–Luminance Gain
This menu allows the users to set the luminance gain.
–Chroma Delay
This menu allows the users to set the chrominance delay.
Notes :
•There are some parameters can not adjust according to input signal.
•The settings made in Fine Menu 2 are saved in each currently selected input signal source.
