Marathon F200060 manual Immunity as specified by EN, 1 - 254 Address 1 is default

	Thermocouple Null
	Thermocouple Span
	Cold Junction Trim
Communications port RS-485 Half Duplex Only
Protocol	Modbus RTU
Baud rates	1200, 2400, 4800, 9600, 19.2K (19.2K default)
Parity	None
Address	1 – 254 (Address 1 is default)

Housing
Material	Polyamide PA non-reinforced
Inflammability	Evaluation Class V0 (UL94)
Temperature Range	-40 to 100°C
Dielectric Strength	600 kV/cm (IEC243-1)
Mounting	Snaps on to EN 50022 top hat (T) style DIN rail.

Terminals

Wire clamp screw terminals on four position removable terminal blocks.

Wire Size	AWG 24 – 12 flexible stranded, removable terminal blocks.
Max. Torque	0.8 Nm

CAUTION: DO NOT CONNECT OR DISCONNECT HOUSING PLUGS WHILE MODULE IS POWERED OR UNDER LOAD.

Weight	10 oz
Environmental Conditions
Operating Temperature		-20	°C to 55 °C (-4 to 130 F)
Storage Temperature		-40	°C to 85 °C (-40 to 185 F)
Operating and Storage Humidity
		85% max relative humidity, noncondensing, from –20
		to 65°C
Certifications and Compliance (PENDING)
Safety	EN 61010-1, IEC 1010-1

Safety requirement for electrical equipment for measurement, control, and laboratory use, Part 1

Electromagnetic Compatibility

Immunity as specified by EN 50082-2

Electrostatic discharge	EN 61000-4-2	Level 3: 8 kV air
Electromagnetic RF fields	EN 61000-403	Level 3: 10 V/m
		80 MHz – 1 GHz

Page 19 of 23

11/14/2006 Rev. 14