1-3
Nº326S Preamplifier Getting Started
optimal power and isolation for even the most sensitive adjust-
ments. Precision surface-mounted resistors accommodate adjust-
ments in 1.0dB increments up to 23.0dB and in 0.1dB
increments above 23.0dB.
Unlike most stereo preamplifiers, the Nº326S is designed to
integrate with multi-channel surround sound processors without
the complications associated with competing stereo and multi-
channel master volume controls. SSP (surround sound processor)
mode allows the Nº326S to deactivate its master volume control
to send line-level input signals to the associated processor. With
no interference from the Nº326S, the processor controls the
relative volume level of all channels, allowing it to maintain its
carefully calibrated levels.
Following the Mark Levinson tradition, the Nº326S exceeds all
reasonable expectations for a stereo preamplifier. Its flexible
design – including seven configurable inputs, separate main and
record output connectors, and complete surround sound processor
integration – allow it to accommodate a wide range of demands.
Even more, a series of advanced techniques shield audio circuits,
resulting in an incomparable sound befitting sophisticated music
reproduction systems.
Highlights •7 configurable inputs
Maximum channel separation
Advanced dual-mono design
Multi-channel surround sound processor integration
•3 balanced (female XLR) and 4 single-ended (Mark Levinson-
designed RCA) stereo input connectors
Separate main and record output connectors
Independent power supplies, communication circuits, and
audio circuits for each channel
•Effective noise suppression and isolation techniques
AC power filtering
•2 active voltage regulation stages for audio circuit sections
Independent power supplies for audio circuit and control circuit
sections, each with its own low-noise toroidal transformer
Faraday shield between AC power line and low-voltage
secondaries
•2 proprietary discrete volume attenuators
•Deactivation of unused inputs to eliminate ground-loop noise