2-7
Nº326S Preamplifier Basic Operation
4. stereo record output connectors
Provide left and right-channel analog audio output at fixed
levels. Two single-ended (RCA) connectors labeled 1 and 2 are
available to output single-ended signals to recording components
such as CD-Rs and tape decks.
The Rec.Out parameter can be used to assign the record output
connectors to the desired input(s). It is recommended to use
the Name parameter to associate inputs with the correct
recording components to prevent possible record feedback
loops.
Note
Nº326S volume controls, including master volume and
balance, do not affect record output levels.
5. & slave in communication ports
Provide “links” to compatible Mark Levinson components,
allowing the Nº326S and other linked components to share
controls such as display intensity, standby, playback, input
selection, and record. Two 8-pin modular RJ-45 jacks labeled
and slave in are available.
The communication port can be connected to a Mark
Levinson power amplifier that offers Link communication
ports. The slave in communication port can be connected to
a compatible Mark Levinson digital audio processor or digital
transport that offers Link communication ports.
Note
Refer to Linking (page 2-9) BEFORE linking the Nº326S to
other Mark Levinson components.