Mark Levinson N 326S Set Inputs Menu

3-3
Nº326S Preamplifier Setup Menu
select knob & Scroll through menu items. Rotating the select knob or pressing the
±buttons select ± buttons scrolls upward (clockwise/+) and downward
(counterclockwise/–) through all menu items available on the
open menu. The front panel display indicates the current menu
item.
volume knob & Adjusts the selected parameter setting. Rotating the volume knob
±buttons or pressing the volume ± buttons increases (clockwise/+) and
decreases (counterclockwise/–) the selected parameter setting in
the designated increment. The front panel display indicates the
current setting. (If the current parameter has not been selected
with the enter button, rotating the volume knob or pressing the
volume ± buttons automatically selects the current parameter before
making adjustments.)
Set Inputs Menu
Selecting Set Inputs prompts the selection of the desired input
(for example, Input 1). Selecting an input opens the correspon-
ding Set Inputs menu as shown below, which can be used to
change input names, optimize input gain levels, offset input vol-
ume levels, and assign record output connectors.
(continued)
Input 1 is used here as an example and will continue to be used as an
example throughout this section.
Name=INPUT 1
Gain= +6 dB
Offset= 0.0
Rec.Out=NONE
No326S Setup
Set Inputs
Teach IR
Mute = -20.0
MaxVol= 80.0
Trig.= 12v,L
Sw 1.00 B.18
Set Inputs
Set Input 1
Set Input 2
Set Input 3
Set Input 4
Set Input 5
Set Input 6
Set Input 7
enter enter
Set Input 1
Default Possible
Parameter Setting Settings
Name INPUT Factory-Default, Custom
Gain +6dB or +12dB* +0dB, +6dB, +12dB, +18dB
Offset 0.0dB –20.0dB to +20.0dB
Rec.Out NONE NONE, #1, #2, BOTH
*The factory-default Gain parameter setting is +0dB for Inputs 1-3 and +6dB for
Inputs 4-7.