A-1

Specifications

Unless otherwise specified, these specifications indicate nominal
values measured over a 20Hz to 20kHz bandwidth through balanced
(XLR) connections.
Power Consumption 50W maximum
Operating Voltage 100, 120, 220, or 230V AC power at 50 or 60Hz (preset)
Connector Complement 3 balanced (female XLR) stereo inputs
4 single-ended (Mark Levinson-RCA) stereo inputs
1 balanced (male XLR) stereo main output
1 single-ended (Mark Levinson-RCA) stereo main output
2 single-ended (Mark Levinson-RCA) stereo record outputs
2 8-pin RJ-45 connectors for Link communication
1 6-pin modular RJ-11 connector for RS-232 communication
1 3.5mm mini-jack for trigger output
1 3.5mm mini-jack for ir input
1 phono ground terminal
1 IEC-standard ~ac mains connector
Gain 0, 6, 12, or 18dB (line-level stage)
Volume Control Range 80.0dB (maximum)
Gain Resolution 1.0dB increments up to 23.0dB on front panel display (-57dB)
0.1dB increments above 23.0dB on front panel display (-57dB)
Specifications are subject to change without notice.

Appendix

A