Marmitek 121101 owner manual Read This First, The CableLink 75 system, Multisource

Models: 121101

1 44
Download 44 pages 20.86 Kb
Page 3
Image 3
1. READ THIS FIRST !

1. READ THIS FIRST !

Caution: to reduce risk of electric shock, do not disassemble any part of the videosender system. No user-serviceable parts are inside. If you spill liquid on it, disconnect the unit from the AC outlet to prevent possible fire or shock hazard and consult authorized service personnel.

Use only the supplied powersupplies. Defective parts must be replaced by original spareparts only.

Powerline operated equipment or accessories connected to the unit should bear the CE certification mark and should not be modified in any way that might defeat the safety features. Your CableLink meets all European standards for EMC, Safety and Radio Frequency, however inteference from other RF transmitters may occur. The range of the CableLink is at least 30 meters in an open air situation, however indoor the range is highly influenced by construction materials applied within the house.

Warning: to prevent electric shock hazard, do not expose any part of the CableLink to rain or moisture. Do not use near a bath tub, swimmingpool, etc. Disconnect the unit during thunderstorms from mains, areal socket and other connected equipment to avoid damage.

No guarantee or liability will be accepted for any damage caused due to incorrect use of the equipment supplied, other than indicated in this owner’s manual.

2.The CableLink 75 system.

The CableLink system includes a transmitter and a reciever for antenna signals.

With the CableLink 75 system you can transmit audio and video signals throughout your house to a remote TV or VCR, without additional coaxial cables.

The CableLink Transmitter can be connected directly to your antenna wall socket. The Transmitter is equiped with a built in TV Tuner. This tuner can be programmed and operated remotely with the Remote Control supplied. This tuner converts the antenna signal into an audio/video signal. This A/V signal is transmitted by the unit on a 2,4 GHz frequency. The receiver is connected to your remote Television or VCR on the Scart input.

Multisource.

Additional other video equipment can be connected to the transmitter as well (e.g. VCR, DVD player or satellite receiver) .

The source required can be selected by the Remote Control supplied, even from another room. The CableLink has a built in IR (infrared) extender to be used with your original remotes

You can also use the supplied 5in1 universal remote both locally (for your connected TV) as well as the for various equipment (e.g. DVD, VCR.etc.). connected to the Transmitter. This supplied remote is also used to select channels on the CableLink.

CABLELINK

3

Page 3
Image 3
Marmitek 121101 owner manual Read This First, The CableLink 75 system, Multisource