TRIM AND DOOR INSTALLATION

INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE

COMBUSTIBLE FRAMING

NON-COMBUSTIBLE

 

MEMBERS FACING MATERIAL

FACING MATERIAL

USE ONLY NON-COMBUSTIBLE

TO TOP OF SPACERS.

 

 

MATERIALS BELOW TOP OF SPACERS.

 

 

FIREPLACE

FACE

FIGURE 26

STEEL LINTEL

 

(OPTIONAL)

CAUTION: DO NOT COVER

OR RESTRICT SIDE VENT

AREAS WITH SURROUND

OR TRIM MATERIALS.

WARNING:

THE SPACE BETWEEN THE FACE OF THE FIREPLACE AND THE NON-COMBUSTIBLE FACING MATERIAL MUST MUST BE SEALED. FAILURE TO PROPERLY SEAL THIS CRACK CAN CAUSE A POSSIBLE FIRE HAZARD AND

WILL VOID THE

.

MANTEL INSTALLATION

12"

FIGURE 26A

 

MAX

COMBUSTIBLE FRAMING

 

 

MEMBERS TO

 

COMBUSTIBLE MANTEL

TOP OF SPACERS

 

TOP EDGE OF FIREPLACE

 

 

USE ONLY

 

18" MIN. FROM FIREPLACE OPENING

TO BOTTOM OF COMBUSTIBLE MANTEL.

NON-COMBUSTIBLE

(MANUFACTURER RECOMMENDATION)

MATERIALS BELOW

 

 

TOP OF SPACERS

 

 

 

 

TOP EDGE OF

 

 

FIREPLACE OPENING

FIGURE 27

COMBUSTIBLE

SURROUND

PLACEMENT

COMBUSTIBLE SURROUND MATERIALS MAY BE PLACED INSIDE THE SHADED AREAS. COMBUSTIBLES MAY NOT OVERLAP EDGE OF BLACK PAINTED FACE MORE THAN 1/8".

OUTLINE OF

 

FIREPLACE

 

FIREBRICK

 

2 1/2"

DO NOT RESTRICT

(REF.)

SIDE AIR INLETS

EXTEND LINE FROM OPPOSITE REAR CORNER OF FIREBOX

PAST INSIDE OPENING OF THE FRONT FACE SIDE PANEL.

GLASS DOOR INSTALLATION

This fireplace has been tested and listed for use with optional Model WSB54 glass doors. For installation of the Model WSB54 glass doors, see the instructions provided with the doors.

26

53D9028. Rev 1 03/03

Page 27
Image 27
Martin Fireplaces SB5400SS manual Trim and Door Installation, Mantel Inst Allation