s e c t i o n 1
I N T R O D U C T I O N
Thank you for purchasing the MAC 500/E
This manual covers the MAC 500 with magnetic ballast and the MAC 500 E with electronic ballast. “MAC 500/E” refers to both models when describing common features and procedures. The features in software version 1.9 are described. The latest MAC 500/E news and software is available from the Martin web site at http://www.martin.dk.
M A C 5 0 0 / E s a f e t y i n f o r m a t i o n
W A R N I N G !
This product is for professional use only. It is not for household use.
This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp explosion, and falls. 5HDGWKLVPDQXDO before powering or installing the fixture, follow the safety precautions listed below and observe all warnings in this manual and printed on the fixture. If you have questions about how to operate the fixture safely, please contact your Martin dealer or call the Martin
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m e l e c t r i c s h o c k
•Disconnect the fixture from AC power before removing or installing the lamp, fuses, or any part, and when not in use.
•Always ground (earth) the fixture electrically.
•Use only a source of AC power that complies with local building and electrical codes and has both overload and
•Do not expose the fixture to rain or moisture.
•Refer any service operation not described in this manual to a qualified technician.
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m U V r a d i a t i o n a n d l a m p e x p l o s i o n
•Never operate the fixture with missing or damaged lenses and/or covers.
•When replacing the lamp, allow the fixture to cool for at least 15 minutes before opening the fixture or removing the lamp. Protect your hands and eyes with gloves and safety glasses.
•Do not stare directly into the light. Never look at an exposed lamp while it is lit.
•Replace the lamp before usage exceeds the maximum service life, or if the lamp is defective or worn out.
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m b u r n s a n d f i r e
•Never attempt to bypass the thermostatic switch or fuses. Always replace defective fuses with ones of the speci- fied type and rating.
•Keep all combustible materials (for example fabric, wood, paper) at least 1.0 meter (39 inches) away from the fixture. Keep flammable materials well away from the fixture.
•Do not illuminate surfaces within 1.0 meter (39 inches) of the fixture.
•Provide a minimum clearance of 0.1 meters (4 inches) around fans and air vents.
•Never place filters or other materials over the lens.
•The exterior of the fixture can reach temperatures up to 140° C (284° F). Allow the fixture to cool for at least 5 minutes before handling.
•Do not modify the fixture or install other than genuine Martin parts.
•Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
To p r o t e c t y o u r s e l f a n d o t h e r s f r o m i n j u r y d u e t o f a l l s
•When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight of all installed devices.
•Verify that all external covers and rigging hardware are securely fastened and use an approved means of second- ary attachment such as a safety cable.
•Block access below the work area whenever installing or removing the fixture.
•Do not lift the fixture by its head.
4 | MAC 500/E User Manual |
