INSTALLATION INSTRUCTIONS
UnpacktheRefrigerator
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap
and dry.
products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety. ”
Properly dispose of packaging.
When MovingYour Refrigerator:
Your refrigerator is heavy. When moving the refrigerator
Always pull the refrigerator straight out when moving it.
Do not wiggle or “walk” the refrigerator when trying to move
Clean Before Using
After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care. ”
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small,
LocationRequirements
WARNING
Explosion Hazard
gasoline, away from refrigerator.
Your refrigerator is designed for indoor, household use only.
To ensure proper ventilation for your refrigerator, allow for a
" (1.25 cm) space at the top and behind the refrigerator.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
2
" (5.4 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.
NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55˚F (13 ˚C).
" (1.25 cm)
2
" (5.4 cm)
3
