T R O U B L E S H O O T I N G
Before Calling for Service
Before calling for service, check the trouble shooting table on this page. This table lists possible problems that you can remedy without difficulty to avoid an unnecessary service call.
If you do need service, contact your dealer or the manufacturer. In any correspondence, refer to the model number and serial number of your unit which is located on the lower front cabinet flange. Retain you proof of purchase. You may want to record these numbers in the space provided on this page. Follow the procedure outlined on page 5.
| Possible | |
Problem | Causes/Solutions | |
Odor in cabinet | • | Interior needs cleaning |
|
|
|
Noisy operation | • | Cabinet not level |
| • | Weak floor |
|
|
|
Cabinet vibrates | • | Cabinet not level |
| • | Weak floor |
|
|
|
Cabinet light not working | • | Tube burned out |
| • No power at outlet | |
|
|
|
Appliance will not run | • | Temperature control turned |
|
| to “OFF” |
| • Line cord not plugged in | |
| • No power at electrical | |
|
| outlet |
| • | House fuse blown |
|
|
|
Appliance runs too long | • | Prolonged door openings |
| • Control set too cold | |
| • | Condenser needs cleaning |
|
|
|
Moisture collects inside | • | Too many door openings |
| • | Prolonged door openings |
| • | Hot, humid weather |
|
| increases condensation |
|
|
|
Moisture collects on outside | • | Hot, humid weather |
surface |
| increases condensation. |
|
| As humidity decreases, |
|
| moisture will disappear. |
| • | Control improperly set. |
|
|
|
Interior too hot/too cold | • | Control improperly set |
| • | Faulty thermometer |
| • | Relocate thermometer to |
|
| center of cabinet and |
|
| recheck |
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products.
8
