scheduled maintenance

Before Each Use

Review the Safety Checks and Services section of this Owner’s Manual. There are important functions that must be followed before, during and after every outing, without fail! The Safety Checks and Services notes that all drain plugs must be reinstalled prior to operating the boat!

Check Raw Water Intake Strainer (where equipped)

Because a clogged raw water intake strainer puts undue strain on the engine(s), the intake should be checked prior to starting the boat. Boats with closed cooling systems are not equipped with this.

Step 1: The raw water intake strainer serves to reduce or prevent the intake of debris into the engine’s cooling system. Therefore, it is critical that it be checked prior to start- ing the engine. If operating in brackish or dirty water with considerable flora or algae, it is advisable to shut off the engine during an extended outing to be sure that the strainer is not clogged. If there is debris, even if it

is biodegradable, it should be manually removed from the strainer. If there has been evidence of material in the strainer routinely at the body of water on which the boat is operated, it is recommended that the strainer be cleaned again at the conclusion of each outing as it may be easier to remove material when it is still wet.

Inspect the Battery Connections and Hold-Downs

Because poor connections or hold-downs may result in erroneous voltmeter readings, MasterCraft recommends doing this before starting the boat.

Step 1: Ensure the engine is OFF and the engine safety starting switch disconnected. Be certain that the throttle/shift control lever is in neutral. Locate the battery. Batteries are placed in a variety of locations, depending on the model. Check under the observer seat or behind the rear seat.

Step 2: Check that the battery post connections are clean and tight. If not:

•Loosen and remove the negative terminal connection first. Be careful not to touch the positive terminal with the wrench.

•Loosen and remove the positive terminal connection.

•Remove the battery hold-downs and remove the battery from the boat.

•Clean corrosion from the battery posts with a battery termi- nal cleaner.

•Clean the battery with a water-and-baking-soda solution. Use care to avoid allowing the solution to enter the battery vents. Rinse the battery with fresh water.

Battery electrolyte fluid is dangerous. It contains sulfuric acid, which is poisonous, corrosive and caustic. If electrolyte fluid is spilled or placed on any part of the human body, immediately flush the area with large amounts of clean water and immediately seek medical attention.

•Use a battery terminal cleaning brush to remove corrosion from the inside of the battery terminals. Clean the terminals with a water-and-baking-soda solution and rinse with fresh water.

•Check the battery box that normally holds the battery in place to determine whether there is evidence of battery fluid inside it. Battery fluids are corrosive and can cause perma- nent damage to the battery box. If fluid is evident, wash out

MasterCraft 2009 Owner’s Manual - Page 16-1

Page 55 Page 57
Page 56
Image 56
MasterCraft 2009 MariStar X-Series owner manual Check Raw Water Intake Strainer where equipped
Page 55 Page 57

2009 MariStar X-Series specifications

The 2009 MasterCraft MariStar X-Series stands out as a remarkable blend of luxury and performance in the world of wakeboarding and recreational boating. Designed for enthusiasts who demand the best, this model encapsulates everything that differentiates MasterCraft's prestigious line of boats.

The MariStar X-Series boasts a sleek, aerodynamic hull that not only enhances its visual appeal but also contributes to its superior handling and smooth ride. With a length of 22 feet, it provides plenty of space for friends and family while maintaining the agility required for wake sports. The deep-V hull design effectively cuts through choppy waters, creating a stable and comfortable experience for passengers.

One of the standout features of the MariStar X-Series is its powerful engine options. The boat offers a range of high-performance engines, allowing users to select the power that best suits their needs. With options that can deliver up to 350 horsepower, the MariStar ensures exhilarating speed and excellent torque for wakeboarding, wake surfing, and other water activities.

The boat’s unique ballast system is designed to enhance the quality of the wakes produced, allowing for optimal wakeboarding conditions. The integrated system lets users easily fill and drain water ballast to customize the wake shape and size, ensuring that every rider gets the best possible experience.

Inside, the cabin of the 2009 MariStar X-Series is a testament to luxury and convenience. Plush seating provides comfort, while the premium sound system delivers high-quality audio perfect for a day out on the water. The cockpit is laid out for easy access to controls, making it user-friendly for both seasoned drivers and novices.

Additional features include a foldable bimini top that provides shade during sunny outings and ample storage compartments for gear. The attention to detail extends to the materials used in the upholstery, which are not only stylish but also durable and easy to maintain.

Overall, the 2009 MasterCraft MariStar X-Series combines performance, technology, and luxury in a single package. Its innovative design and features cater to both recreational users and serious water sports enthusiasts, making it a cherished choice for those looking to elevate their on-water experience.
Top Page Image Contents