On the CSX 265 head, the following instructions should be fol- lowed:

Before operation:

Step 1: Fill the freshwater tank and add deodorant to the hold- ing tank through the toilet bowl.

Step 2: Turn on the inlet water supply.

Step 3: Turn on the electrical power to the system. (The breaker panel is located in the head compartment.)

Step 4: Flush water into the system by depressing the flush lever (near the deck) until water starts flowing to the vacuum pump, which requires approximately 15 seconds. The vacuum pump will run for approximately 60-to-90 seconds. When the system reaches operation at the vacuum level, it will shut off.

Step 5: Remember that the vacuum pump starts automatically. Shut off the system before servicing and do not leave the boat with the toilet system breaker on. (The breaker panel is located in the head compartment.) Never use drain openers, alcohol, solvents, etc., in the system as these are likely to damage the head.

Head operation:

Step 1: To add water to the head before using, raise the flush lever (near the deck) until the desired water level is reached. Generally, more water is needed only when flushing solids.

Step 2: To flush the head, press the flush lever sharply down to the deck until the contents clear the bowl. A sharp pop- ping noise is normal when the vacuum seal is broken.

Hold the lever down for three (3) seconds. After flush- ing, let the lever snap back into position. If the flush lever is accidentally released before waste clears the bowl, do not flush again until the vacuum pump stops running. A small amount of water remains in the bowl after flushing.

Step 3: Do not dispose of sanitary napkins or other non-dis- solving items in the head. These items can cause plug- ging of the system.

Following operation:

Step 1: Dispose of waste properly. (DO NOT DISPOSE

WASTE IN ANY LOCATION, INCLUDING NAVI- GABLE BODIES OF WATER, WHERE SUCH DISPOSAL IS ILLEGAL OR CREATES AN ENVI- RONMENTAL HAZARD.)

Step 2: Keep the system clean, using mild detergent or cleaner.

Both types of heads are supplied with in-depth instructions, which will be found in the head and should be removed and read prior to the first use of the system. Store the instructions with this Owner’s Manual and other important material regard- ing the boat.

Use only rapid-dissolve toilet paper with these head systems, and only deodorant specially formulated for this type of head sys- tem. See instructions for details. In the event that anything from the head’s bowl or holding tank escapes, it should be cleaned

as soon as practicable. Failure to clean any spillage may result in unpleasant odors, mildew, mold and damage to the deck or other areas of the boat. This is not covered under warranty.

See the Storage & Winterization section of this Owner’s Manual for important information regarding the preparation of the head for storage.

Heater

All MasterCraft models offer a heater option. The heater’s three- position switch is turned up for ON (LOW), or turned down for ON (HIGH). The center position is OFF. Warmed air from an electrically powered heater box will be blown from vents within the boat deck. In regular use, the heater should not require any routine maintenance. However, it is advisable to avoid placing

MasterCraft 2009 Owner’s Manual - Page 19-4

Page 70 Page 72
Page 71
Image 71
MasterCraft 2009 MariStar X-Series owner manual Heater, Before operation
Page 70 Page 72

2009 MariStar X-Series specifications

The 2009 MasterCraft MariStar X-Series stands out as a remarkable blend of luxury and performance in the world of wakeboarding and recreational boating. Designed for enthusiasts who demand the best, this model encapsulates everything that differentiates MasterCraft's prestigious line of boats.

The MariStar X-Series boasts a sleek, aerodynamic hull that not only enhances its visual appeal but also contributes to its superior handling and smooth ride. With a length of 22 feet, it provides plenty of space for friends and family while maintaining the agility required for wake sports. The deep-V hull design effectively cuts through choppy waters, creating a stable and comfortable experience for passengers.

One of the standout features of the MariStar X-Series is its powerful engine options. The boat offers a range of high-performance engines, allowing users to select the power that best suits their needs. With options that can deliver up to 350 horsepower, the MariStar ensures exhilarating speed and excellent torque for wakeboarding, wake surfing, and other water activities.

The boat’s unique ballast system is designed to enhance the quality of the wakes produced, allowing for optimal wakeboarding conditions. The integrated system lets users easily fill and drain water ballast to customize the wake shape and size, ensuring that every rider gets the best possible experience.

Inside, the cabin of the 2009 MariStar X-Series is a testament to luxury and convenience. Plush seating provides comfort, while the premium sound system delivers high-quality audio perfect for a day out on the water. The cockpit is laid out for easy access to controls, making it user-friendly for both seasoned drivers and novices.

Additional features include a foldable bimini top that provides shade during sunny outings and ample storage compartments for gear. The attention to detail extends to the materials used in the upholstery, which are not only stylish but also durable and easy to maintain.

Overall, the 2009 MasterCraft MariStar X-Series combines performance, technology, and luxury in a single package. Its innovative design and features cater to both recreational users and serious water sports enthusiasts, making it a cherished choice for those looking to elevate their on-water experience.
Top Page Image Contents