The U.S. Coast Guard requires a method of fire suppression on ev- ery boat operating within U.S. waterways. MasterCraft has made this an optional installation because of the recognition that needs can vary considerably. In some instances, consumers may want to purchase a fire extinguisher from an aftermarket supplier. Master- Craft also offers a standard, manual fire extinguisher that can be installed at the time of purchase or at any point after the fact. In some models, an automatic fire suppression system is available for the motorbox area. This system operates off a sensor, and there is no need for the boat operator to manually start it. However, as with any addition to a boat, there is potential for failure. For that reason, MasterCraft recommends that boats be equipped with a manual fire extinguisher unit as well.

MasterCraft further recommends that boat owners include a check of the fire suppression and extinguisher units during the annual maintenance to be sure that they are always ready for use. Some units may not require annual checks; refer to the sig- nage and labeling on the individual units for further guidance.

GPS and Chartplotter

All GPS and chartplotter systems come with extensive instruc- tion manuals. Please refer to these manuals or the manufactur- er’s website for details and guidance.

Head

The following information is provided for the head installed in a MariStar 280 or X-80:

Preparing the head for use:

Step 1: With the seat lid closed, pull the flush handle to open the slide valve. Then push to close. This relieves air pressure that may be created in the lower holding tank due to changes in temperature or altitude.

Step 2: Remove the water cap and fill the upper tank until it reaches about 1 inch (25 mm) below the opening. Replace the cap.

Step 3: Pull the flush hand to open slide valve.

Step 4: Pour deodorant directly into the lower tank, then close the slide valve. Do NOT pour deodorant into the bowl with the slide valve closed.

Step 5: Stroke the air pump about 15 times or until air emits through the relief valve on the water cap. Do not over- pressurize the upper tank by covering the relief valve. Do not let the upper tank pressurize when it is discon- nected from the lower tank.

In using the toilet:

Step 1: Before each use, with the seat lid closed, pull the flush handle to open the slide valve, then push to close. This relieves air pressure that may be created in the lower holding tank due to changes in temperature or altitude.

Step 2: Pull the flush hand to release waste in the lower tank.

Step 3: Push the flush button to rinse the bowl. Push the flush hand to close the slide valve.

To empty the holding tank:

Step 1: When the tank level indicator shows “FULL,” or at the end of an outing, empty the lower tank.

Step 2: Pull up on the rear latch to separate the upper tank from the lower tank. Carry the lower tank to an autho- rized waste disposal area or a normal toilet. (DO NOT

DISPOSE WASTE IN ANY LOCATION, INCLUD- ING NAVIGABLE BODIES OF WATER, WHERE SUCH DISPOSAL IS ILLEGAL OR CREATES AN ENVIRONMENTAL HAZARD.)

Step 3: Rotate the discharge spout way from the tank and open the vent on top of the holding tank. Empty the tank.

Step 4: If water is available, rinse the lower tank before reas- sembling the portable toilet.

MasterCraft 2009 Owner’s Manual - Page 19-3

Page 69 Page 71
Page 70
Image 70
MasterCraft 2009 MariStar X-Series owner manual GPS and Chartplotter, Head
Page 69 Page 71

2009 MariStar X-Series specifications

The 2009 MasterCraft MariStar X-Series stands out as a remarkable blend of luxury and performance in the world of wakeboarding and recreational boating. Designed for enthusiasts who demand the best, this model encapsulates everything that differentiates MasterCraft's prestigious line of boats.

The MariStar X-Series boasts a sleek, aerodynamic hull that not only enhances its visual appeal but also contributes to its superior handling and smooth ride. With a length of 22 feet, it provides plenty of space for friends and family while maintaining the agility required for wake sports. The deep-V hull design effectively cuts through choppy waters, creating a stable and comfortable experience for passengers.

One of the standout features of the MariStar X-Series is its powerful engine options. The boat offers a range of high-performance engines, allowing users to select the power that best suits their needs. With options that can deliver up to 350 horsepower, the MariStar ensures exhilarating speed and excellent torque for wakeboarding, wake surfing, and other water activities.

The boat’s unique ballast system is designed to enhance the quality of the wakes produced, allowing for optimal wakeboarding conditions. The integrated system lets users easily fill and drain water ballast to customize the wake shape and size, ensuring that every rider gets the best possible experience.

Inside, the cabin of the 2009 MariStar X-Series is a testament to luxury and convenience. Plush seating provides comfort, while the premium sound system delivers high-quality audio perfect for a day out on the water. The cockpit is laid out for easy access to controls, making it user-friendly for both seasoned drivers and novices.

Additional features include a foldable bimini top that provides shade during sunny outings and ample storage compartments for gear. The attention to detail extends to the materials used in the upholstery, which are not only stylish but also durable and easy to maintain.

Overall, the 2009 MasterCraft MariStar X-Series combines performance, technology, and luxury in a single package. Its innovative design and features cater to both recreational users and serious water sports enthusiasts, making it a cherished choice for those looking to elevate their on-water experience.
Top Page Image Contents