MasterCraft 2009 MariStar X-Series owner manual General Preparation, Fuel System Treatment

Models: 2009 MariStar X-Series

1 88
Download 88 pages 62.86 Kb
Page 64
Image 64

storage and winterization

Storage or winter lay-up requires special preparation to prevent damage to the boat. Since winter storage is an annual event, it presents an excellent opportunity to perform the annual mainte- nance at this time, depending upon the amount of usage. Check with an authorized MasterCraft dealer’s service department regarding the boat’s needs to determine if this is the appropriate time for annual service.

Without proper preparation, storage for long periods of time (at any time of the year) may cause harm to various components of the boat and drive train. Also, if the boat has been stored in be- low-freezing temperatures with water inside the bilge or engine cooling system (including the heater or, shower, ballast tanks, wash down tanks, coolers, or any container or area in which wa- ter has been located), this condition may result in major damage from freezing, which would not be covered under the warranty.

Refer to the engine owner’s manual for guidance regarding stor- age and winterization of the engine, transmission and compo- nents of the drive train.

The following procedures will help avoid most potential types of damage during storage for a period not to exceed five (5) months!

Because of the complexity of preparing a boat for proper winter storage, as well as the possibility of extreme damage to the drive train if a preparation error was made during winterization, Master- Craft recommends scheduling an appointment with an authorized MasterCraft dealer’s service department to permit a technician to perform all winterization procedures.

General Preparation

Before starting you will need the following supplies:

Sta-Bil® Gasoline Stabilizer

Fuel filter

Low tack tape

Fuel System Treatment

Step 1: If the boat will be placed in storage with fuel (no alco- hol in the mix) in the tank, fill the tank with fresh fuel and a sufficient amount of Sta-Bil® gasoline stabilizer to treat the entire tank. Follow instructions on the con- tainer.

Step 2: If the boat will be placed in storage with fuel that con- tains alcohol, the fuel tank should be drained as com- pletely as possible, the fuel disposed of properly, and Sta-Bil gasoline stabilizer added to any fuel remaining in the tank. Follow the directions on the container.

Step 3: Start the engine and operate at idle until the engine reaches normal operating temperature. (To accomplish this, the boat must be in the water or attached to a water supply using a hose and suitable adapter that will allow an uninterrupted supply of water to the engine. If using a hose and adapter, adjust the faucet to avoid over-cooling the engine at low RPM.) Run the engine for at least fifteen (15) minutes and ensure that the fuel stabilizer enters the engine’s fuel system.

Step 4: Perform the annual maintenance as described in this Owner’s Manual.

General Power Package Preparation

Step 1: Lubricate the throttle and shift linkages and cables with multi-purpose grease.

Step 2: MasterCraft recommends that batteries be removed from the boat for winter storage. Batteries should be fully charged before being stored in a cool, dry location, protected from the elements and fully re-charged before

MasterCraft 2009 Owner’s Manual - Page 17-1

Page 64
Image 64
MasterCraft 2009 MariStar X-Series General Preparation, Fuel System Treatment, General Power Package Preparation

2009 MariStar X-Series specifications

The 2009 MasterCraft MariStar X-Series stands out as a remarkable blend of luxury and performance in the world of wakeboarding and recreational boating. Designed for enthusiasts who demand the best, this model encapsulates everything that differentiates MasterCraft's prestigious line of boats.

The MariStar X-Series boasts a sleek, aerodynamic hull that not only enhances its visual appeal but also contributes to its superior handling and smooth ride. With a length of 22 feet, it provides plenty of space for friends and family while maintaining the agility required for wake sports. The deep-V hull design effectively cuts through choppy waters, creating a stable and comfortable experience for passengers.

One of the standout features of the MariStar X-Series is its powerful engine options. The boat offers a range of high-performance engines, allowing users to select the power that best suits their needs. With options that can deliver up to 350 horsepower, the MariStar ensures exhilarating speed and excellent torque for wakeboarding, wake surfing, and other water activities.

The boat’s unique ballast system is designed to enhance the quality of the wakes produced, allowing for optimal wakeboarding conditions. The integrated system lets users easily fill and drain water ballast to customize the wake shape and size, ensuring that every rider gets the best possible experience.

Inside, the cabin of the 2009 MariStar X-Series is a testament to luxury and convenience. Plush seating provides comfort, while the premium sound system delivers high-quality audio perfect for a day out on the water. The cockpit is laid out for easy access to controls, making it user-friendly for both seasoned drivers and novices.

Additional features include a foldable bimini top that provides shade during sunny outings and ample storage compartments for gear. The attention to detail extends to the materials used in the upholstery, which are not only stylish but also durable and easy to maintain.

Overall, the 2009 MasterCraft MariStar X-Series combines performance, technology, and luxury in a single package. Its innovative design and features cater to both recreational users and serious water sports enthusiasts, making it a cherished choice for those looking to elevate their on-water experience.