guide to troubleshooting

The following chart will assist you in finding and correcting minor mechanical and electrical problems with your MasterCraft boat. Engine manuals include troubleshooting suggestions regarding drive train issues.

To correct a problem, first determine what the symptom is. Start with the first cause and eliminate the possibility of each until the prob- lem is corrected. Due to the specialized skill and tools needed to correct major issues, that information has not been discussed below. If a problem is not addressed herein, please contact an authorized MasterCraft dealer’s service department.

When experiencing a problem, check the surroundings before shutting down the boat. If a sudden stop would place other boaters in jeopardy, continue on until it is safe to slow or stop to analyze the situation. Always be aware of the surroundings and how actions may impact other boaters!

Throttle/shifting problems.

Corroded cables.

Clean and lubricate the cables.

 

Low transmission oil level.

Replenish transmission fluid.

 

Sticking transmission shift detent ball.

Clean and lubricate the detent ball.

 

Kink in cable(s).

Have authorized MasterCraft technician

 

 

replace the cable(s).

 

 

 

Steering problems.

Corroded cable.

Clean and lubricate the cable.

 

Rudder worn.

See authorized MasterCraft dealer’s

 

 

service department.

 

 

 

Excessive vibration.

Bent strut.

Replace the strut.

 

Fouled propeller.

Remove objects from the propeller shaft and rudder.

 

Damaged propeller.

Replace the propeller.

 

Misaligned propeller shaft coupling.

Seek proper alignment.

 

Bent propeller shaft.

See authorized MasterCraft dealer’s

 

 

service department.

 

 

 

Electrical problems.

Open circuit breaker or blown fuse.

Re-set the circuit breaker or replace the fuse.

 

Loose wiring connections or corrosion.

Clean and tighten wiring connections.

 

Defective sending unit.

Replace the sending unit.

 

Shorted wiring harness.

Have the wiring harness repaired.

 

Defective switch or gauge.

See authorized MasterCraft dealer’s

 

 

service department.

 

 

 

No speedometer reading.

Defective speedometer.

Have the speedometer checked or replaced.

 

Defective speedometer paddle wheel.

Have paddle wheel checked or replaced.

 

 

 

Incorrection speedometer reading.

Improper calibration.

Follow calibration instructions in

 

 

Instruments and Gauges section

 

 

of this Manual.

 

 

 

Gauges do not work or the

Breaker has tripped.

Re-set the breaker.

accessory does not work.

Fuse has blown.

Replace the fuse.

 

Low battery.

Check the battery voltage for a loose ground.

 

Insufficient battery supply.

Replace battery with one that has at least 750CCAs.

 

 

 

MasterCraft 2009 Owner’s Manual - Page 20-1

Page 76 Page 78
Page 77
Image 77
MasterCraft 2009 MariStar X-Series owner manual Guide to troubleshooting
Page 76 Page 78

2009 MariStar X-Series specifications

The 2009 MasterCraft MariStar X-Series stands out as a remarkable blend of luxury and performance in the world of wakeboarding and recreational boating. Designed for enthusiasts who demand the best, this model encapsulates everything that differentiates MasterCraft's prestigious line of boats.

The MariStar X-Series boasts a sleek, aerodynamic hull that not only enhances its visual appeal but also contributes to its superior handling and smooth ride. With a length of 22 feet, it provides plenty of space for friends and family while maintaining the agility required for wake sports. The deep-V hull design effectively cuts through choppy waters, creating a stable and comfortable experience for passengers.

One of the standout features of the MariStar X-Series is its powerful engine options. The boat offers a range of high-performance engines, allowing users to select the power that best suits their needs. With options that can deliver up to 350 horsepower, the MariStar ensures exhilarating speed and excellent torque for wakeboarding, wake surfing, and other water activities.

The boat’s unique ballast system is designed to enhance the quality of the wakes produced, allowing for optimal wakeboarding conditions. The integrated system lets users easily fill and drain water ballast to customize the wake shape and size, ensuring that every rider gets the best possible experience.

Inside, the cabin of the 2009 MariStar X-Series is a testament to luxury and convenience. Plush seating provides comfort, while the premium sound system delivers high-quality audio perfect for a day out on the water. The cockpit is laid out for easy access to controls, making it user-friendly for both seasoned drivers and novices.

Additional features include a foldable bimini top that provides shade during sunny outings and ample storage compartments for gear. The attention to detail extends to the materials used in the upholstery, which are not only stylish but also durable and easy to maintain.

Overall, the 2009 MasterCraft MariStar X-Series combines performance, technology, and luxury in a single package. Its innovative design and features cater to both recreational users and serious water sports enthusiasts, making it a cherished choice for those looking to elevate their on-water experience.
Top Page Image Contents