Low Battery Voltage Notification | Maxon Telecom MM-6280IND specification

5.2.1.2.LED control (AT$$EXT_LED)

This command is used for control of the LED’s on-time. Changes made to this function are written to NV memory and will be present in all profiles.

Table 5-24 Read command

Command	TE2	Æ	MT2	$$EXT_LED?
Response	TE2	Å	MT2	$$EXT_LED: <value>
Value	Time: 0~255 seconds (0: Continuous LED ON - Default)
Table 5-25 Set command
Command	TE2	Æ	MT2	$$EXT_LED=<value>
Response	TE2	Å	MT2	$$EXT_LED: <value>
Response	TE2	Å	MT2	<result_code> (OK ERROR)
				<result_code> (OK ERROR)

5.2.1.3.RS232C Transceiver power-down control (AT$$RS232_PWRDOWN)

This command is used for control of the RS232C Transceiver Power Down function. When there are no valid signal transmissions on all receiver and transmitter inputs for 30 seconds, the transceivers are shut off, reducing current draw for power conservation applications.

TE2 can activate resumption of RS232 power up via dummy AT command. MT2 activity such as MT calls or MT SMS or AT Alerts will wake RS232 from power-down and pass these to TE2.

Table 5-26 Read command

Command	TE2	Æ	MT2	$$RS232_PWRDOWN?
Response	TE2	Å	MT2	$$RS232_PWRDOWN: <value>
	0: Power Down disabled (Default)
	1: Power Down enabled. The modem should go in power save modem
Value	after 30 seconds on inactivity on the RS232. An incoming AT command,
Value	SMS or data call should wake the modem up. The modem will not go into

	sleep mode while in a packet data or circuit switched call.
	Sleep mode will work only when modem is idle.

Table 5-27 Set command

Command	TE2	Æ	MT2	$$RS232_PWRDOWN=<value>
Response	TE2	Å	MT2	$$RS232_PWRDOWN: <value>
Response	TE2	Å	MT2	<result_code> (OK ERROR)
				<result_code> (OK ERROR)

5.3. Low Battery Voltage Notification

MT2 transmits low battery notifications to TE2 and initiates MO SMS alerts by this command where the voltage drops to user determined $$LOWBATT 1 set point or reaches the factory default set points.

NOTE: Whilst the input supply for the is 9–36Vdc, the modem will not power-up at 9 volts. 9.5 volts is required for power-up. MT2 then remains powered-up until the voltage drops to 9 volts.

Extended AT Commands Manual

Page 22 of 70

2009-06-25

MM-6280IND specifications

The Maxon Telecom MM-6280IND is a robust and versatile two-way radio designed to meet the demanding needs of professionals in various fields, including security, construction, and transportation. This model stands out for its combination of advanced features, reliable performance, and user-friendly interface, making it a preferred choice for organizations requiring efficient communication solutions.

One of the key features of the MM-6280IND is its long battery life. Equipped with a high-capacity lithium-ion battery, this radio can provide extended operational time, ensuring that users can stay connected throughout their shifts without frequent recharging interruptions. Additionally, the radio supports multiple battery-saving modes, allowing users to optimize power consumption according to their needs.

The MM-6280IND operates on multiple frequency bands, ensuring compatibility across various communication networks. It supports both analog and digital communication modes, making it adaptable to different environments and user preferences. This dual-mode capability enhances interoperability, allowing seamless communication with other radios, regardless of their technology.

In terms of audio quality, the MM-6280IND features advanced noise-cancellation technology. This ensures clear audio transmission even in noisy environments, such as construction sites or crowded events. Furthermore, the radio is equipped with a built-in speaker and microphone that deliver crisp and loud audio, allowing users to communicate effectively without straining their ears.

Durability is another hallmark of the MM-6280IND. The device is designed to withstand harsh conditions, featuring an IP65 rating for water and dust resistance. This makes it suitable for outdoor use, ensuring that it can function reliably, even in adverse weather conditions. The rugged construction of the radio also protects it from physical impacts, reducing the risk of damage from drops or bumps.

User-friendly functionality is prioritized in the MM-6280IND, with an intuitive keypad and a clear LCD display that make navigation straightforward. It also includes programmable buttons that allow users to customize settings and features according to their specific operational requirements.

Overall, the Maxon Telecom MM-6280IND is a high-performance two-way radio that combines longevity, durability, and adaptability. Its advanced communication technologies and user-focused design make it an excellent tool for professionals seeking efficient and reliable communication solutions in various industries. Whether used for coordinating team efforts or enhancing safety and security, the MM-6280IND is a valuable asset for any organization.

Maxon Telecom MM-6280IND manual Low Battery Voltage Notification, LED control AT$$EXTLED

Models: MM-6280IND