Maxon Telecom MM-6280IND manual Read ALL request, Vbatt request, Rssi request

Command	TE2	Æ	MT2	$$REMOTE_CTRL=<VALUE>
				$$REMOTE_CTRL: <VALUE><.> (USE UPPER CASE –
Response	TE2	Å	MT2	must be followed by a ‘full stop’ as noted)
				<result_code> (OK or ERROR)

10.1.2.2.Read ALL request

This command incorporates the VBATT, RSSI, LOCATION & SWVER SMS automated response request in one command.

Table 10-67 Read Command

	Enter directory number of specific MT2
Command from SMS phone	Enter message “<remote_ctrl_value>.all” (not case
	sensitive)
	Send message
Response from MT2	<directory_number><report><time_date_stamp><remote_ctrl
	_value>
	directory_number: phone number of remote MT2
Value	report: lists reports of VBATT, RSSI, LOCATION & SWVER
	time_date_stamp: hour day month,
	remote_ctrl_value: default or user defined name

‘Site name’ is only incorporated within the ‘remote_ctrl_value.all’ request response and not the individual request responses that follow.

10.1.2.3.VBATT request

Read supply voltage at remote MT2.

Table 10-68 Read command

	Enter directory number of specific MT2
Command from SMS phone	Enter message “maxon.vbatt” (not case sensitive)
	Send message
Response from MT2	<directory_number> VBATT: <time_date_stamp>
Value	directory_number: phone number of remote MT2
	time_date_stamp: hour day month

10.1.2.4.	RSSI request
Read RSSI at remote MT2.
Table 10-69 Read command
		Enter directory number of specific MT2
Command from SMS phone		Enter message “maxon.rssi” (not case sensitive)
		Send message
Extended AT Commands Manual			Page 51 of 70	2009-06-25