Maxon Telecom WL7 Manual Pump Operation, Loading & Unloading Occupant, Standoff Latch Anchor Pin

OPERATING INSTRUCTIONS - Continued

MANUAL PUMP OPERATION

NOTE: If possible, keep the Lift power ON/OFF switch turned ON. In most cases, operating the Lift with Manual Pump may be easier if power is ON. Manual pump operating instructions for the Lift are also located on Pump Cover. See DECALS AND DECAL PLACEMENT in this manual.

If possible, apply power to the Lift by turning ON switch on the Pump Cover (FIG. 21-1). The switch is illuminated when turned ON.

PUMP

COVER

POWER SWITCH

(LH PUMP SHOWN)

FIG. 21-1

LOADING & UNLOADING OCCUPANT

1.Reposition latches to manually unfold the Lift as follows. Raise latch off anchor pin (FIG. 21-2B)on LH side of Lift. Position the standoff to hold latch in place above the anchor pin (FIG. 21-2B). Repeat for latch on RH side of Lift.

STANDOFF

LATCH

ANCHOR PIN

REPOSITIONED

LATCH &

STANDOFF

FIG. 21-2B

LIFT - BACK VIEW

FIG. 21-2A

21 PATENTS PENDING