4.Do not allow any part of your body, or the Lift occupant’s body, to be placed under, within, or around any portion of the moving Lift or its mecha- nisms, or in a position that would trap them be- tween the platform and the ground (or vehicle) when Lift is operated.
5.Consider the safety and location of bystanders and location of nearby objects when operating the Lift. Stand to one side of platform while operating the Lift. Be certain that the area the Lift will move through during operation is clear of all obstacles.
6.Fasten Occupant Restraint Belt Before Operating Lift, but never tighten the belt. Leave a minimum of 3” - 4” slack in the belt. Lift will not operate correctly and may become a hazard if belt is tight.
7.If Lift is not operated for several days or more it may need to be repressurized. Use manual pump to pressurize the system before operating the Lift again. Low hydraulic pressure may cause Lift to operate incorrectly and become a hazard.
8.Always operate the Lift with the vehicle emergency brake set and vehicle parked on Level ground. Operating Lift without emergency brake set or parked on an incline may create a hazard for occupant and attendant.
9.Comply with all attached instruction decals and warning decals.
10.Above all, USE GOOD COMMON SENSE when operating this Lift.
11.Do not move vehicle when door is open.
ADDITIONAL SAFETY CONSIDERATIONS
1.When using the Lift, wheelchair may face outboard or inboard. If possible, position the wheelchair with occupant facing outboard.
2.An ambulatory (standing) occupant may face outboard or inboard. If possible, position ambula- tory occupant on the Lift, facing the direction of travel (face vehicle when entering or face away when exiting), and holding on the handrails.
5 | PATENTS PENDING |
