Maxon Telecom WL7 operating instructions 1

THRESHOLD

PLATE

CAUTION

To prevent damage to Lift and vehicle, Inboard Rollstop must be lowered on the Threshhold Plate before stowing the Lift. If the Inboard Rollstop does not automatically lower, it must be lowered manually. If lowered manually, pin it in position as close as possible to Threshhold Plate.

NOTE: If the Inboard Rollstop automatically lowered to Threshhold Plate, skip step 19. Do not unpin the Actuator.

20.Manually LOWER the

INBOARD ROLLSTOP to THRESHHOLD PLATE (FIG. 27-2). Then pin ACTUATOR to nearest hole on Closer Arm

(FIG. 27-2).

PIN ACTUATOR AT

STANDARD NEAREST HOLE POSITION

PIN

INBOARD

ROLLSTOP

CLOSER ARM

FIG. 27-2

19.If the ACTUATOR will not lower Inboard Rollstop at floor level, unpin ACTUATOR from the Closer Arm (FIG. 27-1).

PIN	CLOSER
	ARM
ACTUATOR

NOTE: If there are no occupants to load on Platform, skip step 21.

21.RELEASE WHEELCHAIR BRAKES or SWITCH ON POWERED WHEEL- CHAIR. Move wheelchair or ambula- tory occupant inside the vehicle.

FIG.27-1

27 PATENTS PENDING