MaxTech 28, 800 user manual Section Five Result Codes, S Registers Function Range/units Default

		Table 4-1 S - Registers
Register		Function	Range/units Default
S0	Auto-answer Ring		0-255/rings	0
S1	Ring counter		0-255/rings	0
S2	Escape code character		0-127/ASCII	43
S3	Carriage return character		0-127/ASCII	13
S4	Line feed character		0-127/ASCII	10
S5	Backspace character		0-32, 127/ASCII	8
S6	Dial tone wait time		2-255 /seconds	2
S7	Remote carrier wait time		1-255/seconds	50
S8	Comma pause time		0-255/seconds	2
S9	Carrier detect response time 1-255/0.1 second			6
S10	Carrier loss time		1-255/0.1second	14
S11	Touch-tone dialing speed		50-255/0.001 second 95
S12	Escape character guard time 0-255/0.02 second			50
S13	Reserved
S14	Echo, response, dialing,		Bit-mapped register	138
	originate/answer
S15	Reserved
S16	Modem tests		Bit-mapped register	0
S17	Reserved
S18	Length of modem tests		0-255 /seconds	0
S19-20Reserved
S21	CTS, DTR, DCD, DSR		Bit-mapped register	4
	and Long Space Disconnect
S22	Speaker and response		Bit-mapped register	117
S23	Remote Digital Loopback		Bit-mapped register	55
	Request, data rate, parity
S24	Sleep mode timer		0-255/ seconds	0
S25	DTR delay		0-255 /0.01 second	5
S26	RTS/CTS delay interval		0-255 /0.01 second	1
S27	Asynchronous/Bell		Bit-mapped register	73
	CCITT Modes
S28	Make/break ratio		Bit-mapped register	0

Section Five - Result Codes

BASIC RESPONSE CODES

OK	0	NO DIALTONE	6
CONNECT	1	BUSY	7
RING	2	NO ANSWER	8
NO CARRIER	3	CONNECT 2400	10
ERROR	4	CONNECT 4800	11
CONNECT 1200	5	CONNECT 7200	12

12