Installation

3.4.2External Drive Activity LED

An external drive activity LED may be connected to the DASP-I/O pin 39 on J1. For more details, see the pin description in Table 5-1.

3.4.3ATA Bus Interface Connector (J1, Section C)

On the DiamondMax 17 80-160GB AT hard disk drives, the ATA bus interface cable connector (J1, section C) is a 40-pin Universal Header, as shown in Figure 3-5.

To prevent the possibility of incorrect installation, the connector has been keyed by removing Pin 20. This ensures that a connector cannot be installed upside down.

See Chapter 5, “ATA Bus Interface and ATA Commands,” for more detailed information about the required signals. Refer to Table 5-1 for the pin assignments of the ATA bus connector (J1, section C).

3-10 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive

Page 25
Image 25
Maxtor 80-160GB manual External Drive Activity LED, ATA Bus Interface Connector J1, Section C