The oven light is not working
The bulb has probably blown. You can buy a replacement bulb (which is not covered under the guarantee) from a good electrical shop. Ask for an Edison screw fitting 15w 240v lamp, FOR OVENS. It must be a special bulb, heat resistant to 300 °C.
Turn off the power supply.
Make sure the oven is cool. Open the oven door and remove the oven shelves.
Unscrew the bulb cover by turning anticlockwise. It may be very stiff.
Taking care to protect your fingers in case the bulb should shatter, unscrew the old bulb.
Screw in the new bulb, screw back the bulb cover. Turn on the electricity supply and check that the bulb now lights.
Hotplate ignition or hotplate burners faulty Is the power on? Is the clock illuminated? If not there maybe something wrong with the power supply.
See ‘power supply’ section further on.
Are the sparker (ignition electrode) or burner slots blocked by debris?
Is the burner trim correctly located? Are the burner caps correctly located? See the section entitled ‘Cleaning’
Hotplate burners will not light
Make sure that the burner parts have been replaced correctly after wiping or removing for cleaning.
Check that there is not a problem with your gas supply. You can do this by making sure that other gas appliances you may have are working.
Do the burners spark when you push the button? If not check the power is on - is the clock illuminated?
20
