Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
DO NOT power spray
No metal pans
?Can I change an option?
Options such as single or double pad programming, beep volume, and maximum cooking time can be changed to suit individual preferences.
To change options:
1.Open oven door.
•If door is closed or RESET pad is pressed before programming is complete, changes are discarded and microwave exits programming mode.
2.Press and hold pad 2 for approximately 5 seconds.
•This begins options mode.
•Microwave will beep and 0P: displays.
3.Press number pad that controls option to be changed.
•See table below for options.
•Current option will display.
4.Press number pad again to change the option.
•Each time pad is pressed, option will change.
•Match code displayed with code for desired option.
5.Press START pad to save changes.
•To change additional options, repeat steps 3 and 4.
•Changes appear after door is closed or STOP/RESET pad is pressed.
Numbered Pads | Display | Options (Factory Settings in Bold) |
1 | OP:10 | 3 second beep. |
End of Cycle Beep | OP:11 | Continuous beep until door is opened. |
| OP:12 | 5 beep bursts until door is opened. |
|
|
|
2 | OP:20 | Eliminates beep. |
Speaker Volume | OP:21 | Sets volume to low. |
| OP:22 | Sets volume to medium. |
| OP:23 | Sets volume to high. |
|
|
|
3 | OP:30 | Prevents beep when pad is pressed. |
Key Beep | OP:31 | Allows beep when pad is pressed. |
|
|
|
4 | OP:40 | 15 seconds after oven door is opened, keyboard disabled. |
Keyboard Enable | OP:41 | 30 seconds after oven door is opened, keyboard disabled. |
Window | OP:42 | 1 minute after oven door is opened, keyboard disabled. |
| ||
| OP:43 | 2 minutes after oven door is opened, keyboard disabled. |
|
|
|
5 | OP:50 | Prevents adding heating time while oven is heating. |
Add Time During | OP:51 | Allows heating time to be changed while oven is heating when a memory pad |
Heating |
| is pressed. |
|
|
|
6 | OP:60 | Allows oven to resume heating time countdown after door is opened during |
Reset Door Open |
| cycle. |
|
| |
| OP:61 | Cancels heating time count down after door is opened during cycle. |
|
|
|
7 | OP:70 | Allows 60 minutes of heating time (some models). |
(some models) | OP:71 | Allows 10 minutes of heating time. |
Maximum Heating Time |
|
|
|
|
|
8 | OP:80 | Allows use of preprogrammed pads only. |
Manual Operation | OP:81 | Allows use of manual time entry and preprogrammed pads. |
|
|
|
9 | OP:90 | Allows 10 |
(some models) | OP:91 | Allows 100 |
Double Digit Operation |
|
|
|
|
|
0 | OP:00 | Do not display message. |
Clean Filter Message | OP:01 | Display message for 24 hours every 7 days. |
| OP:02 | Display message for 24 hours every 30 days. |
| OP:03 | Display message for 24 hours every 90 days. |
|
|
|
Part No.12804405
Revised 10/04
©2006 Maytag Services
|
|
|
|
|
|
| For full product documentation visit: | ♥ 2004 Amana Appliances |
|
|
|
|
|
| ™ | www.amanacommercial.com/wavelink | Amana, Iowa 52204 |
|
|
|
|
|
|
| 16026795 | |
|
|
|
|
|
|
|
