16. Insert the base to support brackets (removed in step 11) on both sides the upper base and secure with the screws also removed in step 12. (See figures 38 & 39.)
.... | " _" | L'o |
\\\
\\
Dryer _\_ -\
Base - _
"/ |
| Tab | /_ |
...., | _; |
| Screw |
| ,\ |
|
|
Figure | 38 |
| Figure 39 |
17. Raise gas pipe with shut off valve up and secure to gas valve union• (See figure 40.) Tighten fitting with a crescent wrench being careful not to over tighten. (See figure 41.)
Do not apply teflon tape or pipe sealing compound to the threads of the shut off valve. This is a brass expansion sleeve fitting.
Figure 40 | Figure 41 |
Page18
