Loading |
Upper Rack
Glasses, cups, stemware,
The
up or down for loading flexibility. Fold it down to hold
knives, spatulas and spoons or short items like cups or juice glasses. Fold it up for taller items like glasses, bowls, plates, etc.
slotted covers, load knives, handles up and spoons and forks handles down.
Be sure that thin, finely pointed items do not through the basket. This could block the arm.
Auxiliary Basket (select models)
Use this supplemental basket in the upper or lower rack for loading miscellaneous items and utensils. This is also a place to load
and pointed
The edge of the Stack- Rack (select models) is designed to hold stemware in place. Taller stemware will fit better on the right side as the upper rack is deeper on this side.
T |
Upper Rack
removed when tall or oversized into the lower rack. Unload it from the dishwasher.
The Cup Clips (select models) located in the center of the upper rack can be used to hold
Lower
A variety of | bowls, |
pots and | loaded in this |
rack. |
|
| the left side and |
3 to 1⁄2 of the way out.
each plastic push tab rack stop from the each track, push inward (toward the rack) on
area of the rack stop. The rack stop will open and can be easily removed by pulling
straight out. Take care to support the track while removing rack
stops.
3. Roll the rack all the 
way out of the
track and remove from the
dishwasher.
To replace:
• Reverse the above
procedure to replace the rack into the dishwasher.
Utensil Basket
vary)
cleaning results, prevent from nesting together by some items in the basket
with handles up and some with handles down. On models with
Important
The dishwasher will not operate correctly if the wash arm is not aligned with one of the water inlet holes on back wall of the dishwasher.
3
