Maytag MDB8750AW, MDB9750AW E L E C T R I C A L R E Q U I R E M E N T S, Qualified Individuals

Built-In Dishwasher

I n s t a l l a t i o n I n s t r u c t i o n s

Leave Installation Instructions and User’s Guide with Owner

ALL ELECTRICAL WIRING, GROUNDING AND PLUMBING SHOULD BE

DONE IN ACCORDANCE WITH NATIONAL AND LOCAL CODES BY

QUALIFIED INDIVIDUALS.

E L E C T R I C A L R E Q U I R E M E N T S

This dishwasher is designed for operation on an individual 120 VAC, 60 Hz grounded electrical circuit. Use required fuse (15 amp) or comparable circuit breaker. Two wire with ground service to the dishwasher is recommended for connection at the terminal box and for grounding.

WARNING

To prevent accidental contact with electrical connections, built-in dishwasher models must not be connected to a power source unless the dishwasher is completely enclosed, with front panels in place. If the back or either side of the dish- washer is exposed, a panel must be used to complete this enclosure. Failure to follow this warning could result in death or serious injury.

G R O U N D I N G I N S T R U C T I O N S

This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

WARNING

To prevent the possibility of electrical shock, this dish- washer, as other electrical appliances, must be adequate- ly grounded. It is the responsibility of the installer at the point of installation, taking into consideration local condi- tions and requirements. Failure to follow this warning could result in death or serious injury

P L U M B I N G R E Q U I R E M E N T S

CHECK LOCAL PLUMBING CODES FOR APPROVED PLUMBING PROCEDURES AND ACCESSORIES. ALL PLUMBING SHOULD BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL CODES.

WARNING

Disconnect electrical power to dish- washer before you start! Failure to follow this warning could result in death or serious injury.