Maytag MMV5100AA manual Special Care, Bleach Alwayswipe With The Grain When Cleaning, Agents

SPECIAL CARE

For best performance and safety, the inner door panel and the oven front frame should be free of food or grease buildup. Clean them often with a

mild detergent. Then rinse and wipe dry. Never use cleaning powders or abrasive pads.

STAINLESS STEEL/BRUSHED CHROME (SELECT MODELS):

•DO NOT USE ANY CLEANING PRODUCT CONTAINING CHLORINE

BLEACH.

•ALWAYSWIPE WITH THE GRAIN WHEN CLEANING.

•TO PREVENT SCRATCHING, DO NOT USE ABRASIVE OR CAUSTIC

AGENTS.

•Dally Cleaning/Light Soil -- Wipe with one of the following - soapy water, white vinegar/water solution, Formula 409 Glass and Surface Cleaner* or a similar multi-surface cleaner - using a sponge or soft cloth. Rinse and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray (Part No.20000008).**

•Moderate/Heawj Soil -- Wipe with one of the following. Bon Ami or Soft Scrub* - using a damp sponge or soft cloth. Rinse and dry. To restore luster and remove streaks, follow with Stainless Steel Magic Spray.

•Discoloration --Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel Cleaner*. Rinse immediately and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray.

After cleaning the control panel, press STOP/CLEAR to clear any entries that might have been entered accidentally while cleaning the panel.

The CHILD LOCK- OUT feature can be activated when cleaning the control panel. (page 13.)

COOKTOP LIGHT replacement

To replace the cooktop light bulb, follow instructions below:

1.Disconnect the power.

2.Remove the screw and carefully remove the cover.

3.Replace with 40-watt incandescent bulbs available from your authorized dealer. High intensity 40-watt bulbs, which are available in supermarkets and hardware stores, may also be used.

4. Replace the cover and put the screw back in,

5. Plug in oven or reconnect power.

Caution:

Be sure the power is disconnected at the house circuit breaker or unplug the power supply cord.

When light is damaged, contact your Authorized Service center.

*Brand names and registered trademarks of the respective manufacturer. **To order, call 1-800-688-8408.

38