Maytag MMV5100AA Trouble, Possible Cause, Possible Remedy, ERROR ERROR1, Press STOP/CLEAR and

TROUBLE	POSSIBLE CAUSE		POSSIBLE REMEDY
					'i
ERROR (ERROR1, 2)	•	ERROR 1: if door is opened	•	Press STOP/CLEAR and
message appears in		before time countdown		restart using Timed
the display window,		appears in the display.		Cooking on page 14,
	•	ERROR 2: If the oven has	•	Press STOP/CLEAR and
		not been plugged into a		wait	for 5 minutes to
		power supply for more than		restart from step 1 of
		5 minutes when you start		Auto	Sensor
		Sensor Cooking.		Microwaving on
				page 16.
Why couldn't ] get	•	The food was not covered	•	See pages 16 - 17 and
good results even		properly,		pages 27 - 28 for
though I cooked food				instructions on how to
using Auto Sensor	•	STOP/CLEAR was pressed		prepare food.
Cooking?		or the door was opened	•	Do not open the door or
		while the sensor was		press STOP/CLEAR
		programming the right		while display shows
		cooking t)me and power		SENSOR COOKING.
		level.
	• The food being cooked was
		not suitable for Auto	•	Use Timed Cooking.
		Sensor Microwaving.		(see page 14)
	• There may have been too
		much or not enough food to "		When cooking more
		ensure proper results from		than	2 Ibs (900 g) or less
		Auto Sensor Microwaving,		than	4 oz. (115 g) of
				food,	use Timed

Cooking on page 14.

35