7
Check with a qualied electrician if you are not sure the washer is properly grounded.
Do not have a fuse in the neutral or ground circuit.

INSTALLATION INSTRUCTIONS

Before You Start

NOTE: To avoid oor damage during installation, set the washer onto cardboard before
moving across oor.
IMPORTANT:
Be sure the foam shipping base has been removed from the bottom of the washer as
directed in the Unpacking Instructions.
If foam shipping base has not been removed, be sure lid is secured with tape before laying
washer on its back.
Removing the foam shipping base is necessary for proper operation.

Remove Shipping Base and Packing Ring

1. Place cardboard supports from shipping carton on oor behind washer for support.
2. Secure the lid with tape.
3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.
4. Remove foam shipping base.
5. Set washer upright.
6. Remove tape from lid. Open lid and remove foam packing ring from washer tub.
Keep foam packing ring in case you need to move the washer in the future.