Product Dimensions
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
Range may be installed with zero clearance to combustible construction at the rear and on the sides below the cooktop.
A
F
A. 28¹⁄₂" (72.4 cm) to 29" (73.7 cm) depth with handle to backguard standoffs.
29" (73.7 cm) depth with handle (KitchenAid models only)
B. 35⁵⁄₈" (90.5 cm) cooktop height (maximum) with leveling legs screwed all the way in*
C. 47¹⁄₈" (119.7 cm) overall height (maximum) with leveling legs screwed all the way in*
D. 29⁷⁄₈" (75.9 cm) width
C*
B*
D
G
E. 26³⁄₄" (67.9 cm) depth to
background standoffs
F.Model/serial number plate (located behind the storage drawer on the
G. Rating number plate (located behind the storage drawer on the
D
B
C
A
|
| E |
F |
| G |
|
| M |
| G | N |
| H | |
|
| |
| H | J |
|
| |
K |
| I |
| L | |
|
| |
J |
|
|
*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.
A. 18" (45.7 cm) upper cabinet to countertop B. 13" (33.0 cm) upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum clearance to the top of the cooktop, see NOTE. E. 30¹⁄₈" (76.5 cm) min. opening width
F. 3" (7.6 cm) min. clearance from both sides of the range to the side wall or other combustible material
G. 6" (15.2 cm) width of H (area for gas and electric) H. Recommended area for gas and electric installation I. 6" (15.2 cm) height of notched area in H
J. 3⁵⁄₁₆" (8.4 cm) distance from side of range to H K. 3" (7.6 cm) width of notched area in H
L. 3" (7.6 cm) distance from wall
M. Cabinet door or hinges should not extend into the cutout. N. 19" (48.3 cm) height of H
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.
5
