McCulloch MCT3362VA Maintenance Instructions, Closer Trimming, Fence / Foundation Trimming, 6-3B

Models: 9096336202 MCT3362VA 966992201

1 29
Download 29 pages 1.91 Kb
Page 7
Image 7
7 - MAINTENANCE INSTRUCTIONS

6 - TRIMMING INSTRUCTIONS

7 - MAINTENANCE INSTRUCTIONS

CLOSER TRIMMING

Position trimmer straight ahead with a slight tilt so bottom of stringhead is above ground level and string contact occurs at proper cutting point. Always cut away from oper- ator. Do not pull trimmer in toward operator.

FENCE / FOUNDATION TRIMMING

Approach trimming around chain link fences, picket fences, rock walls and foundations slowly to cut close without whip- ping string against the barrier. If the string comes in contact with rock, brick walls, or foundations, it will break or fray. If string snags fencing, it will snap off.

WARNING

DO NOT SWEEP WITH TRIMMER

Sweeping refers to tilting stringhead to sweep away debris from walkways, etc. Your trimmer is a powerful tool and small stones or other such debris may be hurled 50 feet (15 meters) or more, causing injury or damage to nearby prop- erty such as automobiles, homes and windows.

MAINTENANCE CHECKLIST

 

HOURS OF

 

 

OPERATION

 

 

 

 

 

EACH USE

 

 

ITEM

ACTION

10

20

 

 

 

 

SCREWS / NUTS / BOLTS

INSPECT / TIGHTEN

 

 

 

 

 

 

AIR FILTER

CLEAN OR REPLACE

 

 

TRIMMING AROUND TREES

Trim around tree trunks with a slow approach so string does not contact bark. Walk around the tree trimming from left to right. Approach grass or weeds with the tip of the string and tilt stringhead slightly forward.

WARNING

Use extreme caution when SCALPING. Keep a distance of 100 feet (30 meters) between operator, other people and animals during these operations.

SCALPING

Scalping refers to removal of all vegetation down to the ground. To do this, tilt the stringhead to about a 30 degree angle to the left. By adjusting the handle you will have bet- ter control during this operation. Do not attempt this proce- dure if there is any chance flying debris could injure opera- tor, other people or cause damage to property (Figure 6- 3B).

6-3B

12

FUEL FILTER

REPLACE

 

 

 

SPARK PLUG

CLEAN / ADJUST / REPLACE

 

 

 

SPARK ARRESTER SCREEN

CLEAN OR REPLACE

 

 

 

 

INSPECT

FUEL HOSES

 

 

*REPLACE AS REQUIRED

 

 

 

 

 

 

 

INSPECT

STRINGHEAD

 

 

*REPLACE AS REQUIRED

 

 

 

 

* Recommended maintenance by an McCulloch authorized service center technician using Genuine Factory McCulloch

Replacement parts.

 

 

13

Page 7
Image 7
McCulloch MCT3362VA Maintenance Instructions, Closer Trimming, Fence / Foundation Trimming, Do Not Sweep With Trimmer