McIntosh C220 owner manual Rear Panel Connections

Rear Panel Connections

MAIN OUTPUTS	MAIN POWER
(Balanced) send	CONTROL Output
signals to a Power	sends a turn-on signal
Amplifier	to a McIntosh Com-
	ponent when the C220
	is turned on

SUM DATA PORT sends	GND terminal
data signals from all the	accepts a ground
Data Ports to McIntosh	wire from a
Source Components for	turntable
control with the C220
Remote Control

Connect the C220 power cord to a live AC outlet. Refer to informa- tion on the back panel of your C220 to deter- mine the correct voltage for your unit

ACCessory (C) POW- ER CONTROL Output sends a turn-on signal to a McIntosh Com- ponent when the C220 is switched On/Off. It may be re-assigned to switched On/Off via remote control

TRIGGERS SPKR1 (A) and	DVD and CD INPUTS
SPKR2 (B) Outputs send	(Balanced) accept high
Turn-On signals to McIntosh	level program source
components. The default set-	signals
ting is used with the SPKR1
and SPKR2 Remote Control
Push-buttons. They may be
re-assigned to Switch On
when a desired Input Source
is selected.

75 WATTS

T630maAL 250V

MAIN OUTPUTS	TAPE OUT	DATA PORTS send	PHONO accepts
sends signals to a	sends signals	signals to McIntosh	signals from a
Power Amplifier	to the input	Source Components	Moving Magnet
	of a recording	to allow control with	phono cartridge
	device	the C220 Remote
		Control

Main Fuse holder, refer to information on the back panel of your C220 to de- termine the correct fuse size and rating

OUTPUTS 1 and 2 send signals to Power Amplifiers and are switched On/Off with the Front Panel Output

1and 2 Push-Buttons. They are also controlled by the Remote Control SPKR 1 and 2 Push-buttons

EXT SENSOR	TAPE, VCR, SAT, DVD, CD,
connector permits	CD2 and TUNER, INPUTS
the connection of a	accept high level program
McIntosh Keypad or	source signals
IR Sensor for remote
operation

8