Re-TitleInputs, Input Source Settings, Display Brightness

1.Rotate the INPUT Control to select the Tuner Input and adjust the VOLUME Control to the desired listen- ing level.

2.Press the SETUP Push-button to access the Setup Mode.

3.Press the Menu  or Menu  Push-button until “TRIM 0.0 TUN” appears on the Front Panel Alpha- numeric Display. Refer to figure 3

Note: If necessary, rotate the INPUT Control for “TUN” and press the SELECT  or  Push-buttons for ”0.0”.

Figure 3

4.Rotate the INPUT Control until the display indicates “TRIM 0.0 CD”.

5.Press the SELECT  or  Push-button or the Remote Control Trim  or  Push-buttons until Listening Volume Level of the CD Input is the same as the Tuner Volume Level. Figure 9 indicates a -2.5dB decrease in the CD Level. Refer to figure 4.

Figure 4

6.Rotate the INPUT Control until the name of the next Input to be adjusted is displayed.

7.Repeat steps 5 and 6 until all the Inputs with sources connected to the C220 have the same relative volume levels when switching between them. Record any changes made to the various inputs from the default settings in the “Input Source Settings Chart” at the top of the page (right column).

8.Press the SETUP Push-button to exit the Setup Mode.

Re-Title Inputs

The C220 provides the ability to change the default Input Titles to match the components in your system. In the fol- lowing example the SAT Input will be renamed and appear as TV on the Front Panel Alphanumeric Display.

Notes: 1. New Input Titles are available for all high level Inputs. They include OFF, TV, LV, TAPE 2 (TP2), and VCR2. If OFF is selected for a given Input, that Input will no longer appear when using the INPUT Control, nor is it accessible with the Remote Control.

2.The Phono Input is designed for connection of a turntable only and thus the title is not changeable. However if the “OFF Title” is selected, the Tube

Input Source Settings

Default Title

New Title

Trim

Trigger

TUNER

CD2

DVD

SAT

VCR

TAPE

PHONO

Saver Function will activate, removing power from the two Phono Tubes.

1.Press the SETUP Push-button to access the Setup Mode.

2.Press the Menu  or Menu  Push-button until “INP

___ > ___” appears on the Front Panel Alphanumeric Display.

3.Rotate the INPUT Control until the Front Panel Alpha- numeric Display indicates “INP SAT > SAT”. Refer to figure 5.

Figure 5

4.Press the SELECT  or  Push-button until the Front Panel Alphanumeric Display indicates “INP SAT > TV”. Refer to figure 6.

Figure 6

5. Press the SETUP Push-button to exit the Setup Mode.

Display Brightness

The Front Panel Alphanumeric DISPLAY Brightness may be varied from a setting of 1 (Dim) to 7 (Bright). Follow the steps below for reducing the Display Brightness.