Safety Instructions
ADDITIONAL SAFETY INSTRUCTIONS!
CAUTION:
The MDLP1 Video Projector weight is 40 pounds (18.14 kilograms). When mounting the projector to a building structure it is important to follow all of the local building/constuction codes. Not evaluated for Wall or Ceiling Mounting.
WARNINGS:
A. Do not remove the cover from the equipment.
B. Do not insert anything into the equipment through the ventilation holes.
C. Do not handle the mains lead with wet hands. D. No naked flame sources, such as lighted candles,
should be placed on the equipment.
E. When disposing of used batteries and the projector lamp, please comply with governmental regula- tions or environmental public instructions rules that apply in your country or area.
F. Do not look into the lens when the projector is turned on. It could damage your eyesight.
LAMP HANDING PRECAUTIONS:
DANGER
This projector uses a high voltage glass mercury vapor lamp. The lamp can break or fail to light when im- properly handled, operating at abnormal temperatures or after extended use.
Lamp life also varies, and operating the lamp be- yond its intended service life may cause it to break or fail to light properly, with risk of resulting damage to the projector or surrounding property or persons. Do not exceed the stated lamp life, nor attempt to override
the projector’s lamp life timing system. The mercury vapor gas inside the lamp bulb may be emitted from the projector’s vent.
Before use, carefully read the projector Owner’s Manual and the lamp replacement instructions. Re- member to handle the lamp with care. In the event of serious trouble, call a McIntosh Authorized Dealer.
1a. Do not directly expose skin to the light of the lamp as it can cause inflamation.
2b. Do not drop, impact, subject to excessive force or otherwise damage the lamp.
3c. Replacing the lamp runs the risk of burns, cuts and electric shock, unplug the AC power cord from the AC power outlet and wait at least 60 minutes for the lamp to cool down before attempt- ing to replace it.
4d. If the lamp breaks and the projector is hung from a ceiling or installed in a high place, unplug the AC power cord from the AC power outlet and call a McIntosh Authorized Dealer for assitance.
5e. It is recommended to replace the lamp when near the end of its designed life. Do not use the lamp beyond the maximum lighting time.
6f. Replace the defective lamp with a genuine Mc- Intosh Lamp, matching the information in this Owner’s Manual.
7g. Before replacing the lamp, carefully read the Lamp Replacement Instructions in this Owner’s Manual and the instructions supplied with the replacement lamp.
8h. If the lamp breaks, leave the area immediately and stay away for at least 30 minutes. Ventilate the room, so as not to inhale the mercury vapor. If you inhale the mercury vapor, see a physician immedi- ately.
3
