McIntosh owner manual Aspect Ratio Options, How to Operate the MDLP1, con’t

How to Operate the MDLP1, con’t

Lamp Mode - The Normal setting provides a brightly il- luminated image with reasonable projector lamp life. The Economy setting has slightly reduced illumination with an increase in lamp life.

Iris - The Lens “F-Stop” setting effects the overall image brightness and contast. The F6.0 setting will in- crease the contrast range of the image. The F3.0 set- ting will increase the brightness range of the image.

Aspect - Allows for changing the projected image size height to width ratio to compensate for the differ- ent image sizes from various sources materials such as film and TV video. Refer to figure 25 and the chart below.

User 1
Picture Adjust	Gamma	A
Fine Menu 1	Contrast	0
Fine Menu 2	Brightness	0
Input Signal	Color	0
RGB/HD Adjust	Tint	0	Full
Display	Color Temp.	3	Normal
OSD/Blanking	Lamp Mode	Normal	Zoom
Config.	Iris	F6.0	V-Stretch
	Aspect	Full	Through

Figure 25

ASPECT RATIO OPTIONS

	16:9 VIDEO SOURCE		4:3 VIDEO SOURCE
MODE	IMAGE	DECRIPTION	IMAGE	DECRIPTION
INPUT	The Image Source Aspect		The Image Source Aspect
SIGNAL
	Ratio is 1.78:1		Ratio is 1.33:1
(HDMI, 1080p signal)
FULL	The 16:9 image is displayed		The 4:3 image is enlarged
	with the correct aspect		horizontally
NORMAL	The picture in normal ratio		The picture in normal ratio
	16:9 is displayed		4:3 is displayed
	Bot h	t he ve r t ical a nd	Bot h	t he ve r t ical a nd
ZOOM	horizontal components are		horizontal components are
	enlarged		enlarged
V-STRETCH	The vertical component of the		The vertical component of the
	aspect ratio is enlongated		aspect ratio is enlongated

THROUGH

Images are actual pixel size

Images are actual pixel size

25