Installation
Installation Overview
The instructions that follow are for the unpacking, assem- bly and setup of the XLS320, XLS340, XLS360 and XCS350 Loudspeaker Systems as supplied. For several models, an optional In Wall Mounting Kit is available. If the Loudspeaker is to be Mounted On or In Wall, refer to “Locating the Loudspeaker System” on page 18, “Tweeter Array Optimization” on page 19 and “How to Connect” starting on page 20, before beginning the Mounting Pro- cess. For additional information on the different types of installation, refer to figure 1.
Caution: The XLS360 Loudspeaker weight is 107 pounds (48.5kg) net and requires two or more persons to safely handle during unpacking, assembly and placement.
It is recommended that the Professionals at your McIn- tosh Dealer, who are skilled in all aspects of installation and operation, install the Loudspeaker System and any as- sociated audio/video equipment.
Unpacking the XLS320 Loudspeaker
1.Remove the entire assembly (Loudspeaker System, Loudspeaker Grille and foam end caps) by lifting up on the bottom of the assembly (Loudspeaker rear) and place it along side the shipping carton on a flat surface.
2.Release the Loudspeaker Grille from the foam end caps and remove it from the protective plastic shipping film and set it aside.
3.In a similar manner, lift out the Loudspeaker System.
4.Close the top flaps of the shipping carton and place the two foam end caps on top of the carton.
5.Carefully remove the protective plastic shipping film from the Loudspeaker System so as not to mar the fin- ish or damage the Loudspeaker System Drivers.
Notes: 1. The XLS320 Loudspeaker is supplied with an On Wall Mounting Bracket and Hardware. If the XLS320 is to be mounted on the wall at this time, proceed to “How to Mount the XLS320 Loudspeaker On the Wall” on page 13.
2.When the optional In Wall Mounting Kit is chosen, refer to the supplied installation guide.
6.Place the Loudspeaker System, with the front facing up, on foam end caps located on top of the shipping
carton. | Fasteners | Grille |
Refer to | Grom- |
|
figure 2. | Loudspeaker | |
7. Orient the |
| |
|
| |
Loud- |
|
|
speaker and the Grille
with the
rounded ends
pointing
in the same direction.
8.Align the Grille fasteners to the Loudspeaker Grom- mets (two on each side). Carefully push down to secure the Grille to the Loudspeaker.
9.Proceed to “Locating the Loudspeaker System” on page 18.
Unpacking the XLS340 Loudspeaker
1.Remove the entire assembly (Loudspeaker System, Loudspeaker Grille and foam end caps) by lifting up on the bottom of the assembly (Loudspeaker rear) and place it along side the shipping carton on a flat surface.
2.Release the Loudspeaker Grille from the foam end caps and remove it from the protective plastic shipping film and set it aside.
3.In a similar manner, lift out the Loudspeaker System.
4.Close the top flaps of the shipping carton and place the two foam end caps on top of the carton.
5.Carefully remove the protective plastic shipping film from the Loudspeaker System so as not to mar the fin- ish or damage the Loudspeaker System Drivers.
Notes: 1. When the XLS340 is to be used with the supplied Floor Standing Base and Hardware, proceed to step 6.
2.The XLS340 Loudspeaker is also supplied with On Wall Mounting Brackets and Hardware. If the XLS340 is to be mounted on the wall at this time, proceed to “How to Mount the XLS340 Loudspeakers On the Wall” on page 14.
3.When the optional In Wall Mounting Kit is chosen, refer to the supplied installation guide.
Installation Methods
Loudspeaker Model Floor Base | Stabilizer Bar On Wall Mounting Kit In Wall Mounting Kit |
XLS320 | Supplied | Optional | ||
XLS340 | Supplied | Supplied | Optional | |
XLS360 | Supplied | |||
XCS350 | Supplied | Supplied | Optional | |
|
| Figure 1 |
|
|
10
