Measurement Specialties PCI-DAS1002 Digital input/output, Interrupts, Miscellaneous, Mechanical

PCI-DAS1002 User's ManualSpecifications

Digital input/output

	Table 10. DIO specifications
Digital type		82C55
Number of I/O		24 (FIRSTPORTA Bit 0 through FIRSTPORTC Bit 7)
Configuration		2 banks of 8 and 2 banks of 4 or
		3 banks of 8 or
		2 banks of 8 with handshake
Input high voltage		2.0	V min, 5.5 V absolute max
Input low voltage		0.8	V max, –0.5 V absolute min
Output high voltage (IOH = -2.5 mA)		3.0	V min
Output low voltage (IOL = 2.5 mA)		0.4	V max
Power-up / reset state		Input mode (high impedance)

Interrupts

	Table 11. Interrupt specifications
Interrupts	PCI INTA# – mapped to IRQn via PCI BIOS at boot-time
Interrupt enable	Programmable. Default = disabled.
Interrupt sources	Residual sample counter
	A/D End-of-channel-scan
	A/D FIFO-not-empty
	A/D FIFO-half-full
	A/D Pacer

Miscellaneous

Table 12. Micellaneous specifications

+5 Volts

+12 Volts

-12 Volts

Available at I\O connector (PC +5V)

Available at I\O connector (PC +12V)

Available at I\O connector (PC –12V)

Power consumption

Table 13. Power consumption specifications

+5 V

0.8 A typical, 1.0 A max

Environmental

	Table 14. Environmental specifications
Operating temperature range	0 to 70 °C
Storage temperature range	-40 to 100 °C
Humidity	0 to 95% non-condensing

Mechanical

Table 15. Mechanical specifications

Card dimensions

PCI half card: 174.63 mm (L) x 106.86 mm (H) x 14.48 mm (D)

22