FIG. 8B
· Insert Side Burner tube through large hole in Side Burner Pan. Allow threaded stud to go through hole in Electrode bracket while laying the Burner flat. (FIG. 8C) Be sure to fit the Side Burner tube over the Side Burner valve nozzle. (FIG. 8D) Secure Side Burner with M4 Wingnut.
(23) Wingnut, M4
Threaded
Stud
(35) Side Burner Grid
1 pc
FIG. 8A
(32) Side Burner
Electrode 1 pc
(33) Side Burner
1 pc
(23) Wingnut, M4
1 pc
Step 8) Assemble Side Burner Electrode and Side Burner:
·Feed Electrode wire through upper left hole from large center hole in Side Burner Reflector. (FIG. 8A) Allow electrode to follow wire into hole and lie flat. (8B)
Side Burner
Electrode
Electrode Wire through hole
|
| Side Burner tube |
|
| end fitted over |
|
| valve nozzle |
FIG. 8C | FIG. 8D |
|
·Attach Electrode Wire end to side terminal of piezo starter under the Control Panel. Be careful not to bend or break terminal. (FIG. 8E)
Piezo Starter
Electrode Wire end to Starter
FIG. 8E
10
